شركة شنغهاي يازو للمضخات · شركة تصنيع مضخات متخصصة الخط الساخن: 021-57775777 الجوال: 15921707645 بريد إلكتروني: 34305982@qq.com
الرئيسية / مركز المنتجات / مضخة جرعات / مضخة قياس غشائية كهرومغناطيسية من طراز DC-M

مضخة قياس غشائية كهرومغناطيسية من طراز DC-M

مضخة جرعات

مضخة القياس الكهرومغناطيسية من سلسلة DC-M هي مضخة قياس ذات غشاء يتم التحكم في تردد ضخها بواسطة معالج دقيق ويتم تشغيلها بواسطة ملف كهرومغناطيسي، ويمكن استخدامها لنقل مجموعة متنوعة من السوائل الكيميائية بدقة.

  • الفئةمضخة جرعات
  • الطرازمضخة قياس غشائية كهرومغناطيسية من طراز DC-M
  • الخط الساخن021-57775777 / 15921707645
  • البريد الإلكتروني34305982@qq.com

مقدمة المنتج

Product introduction

مضخة القياس الكهرومغناطيسية من سلسلة DC-M هي مضخة قياس ذات غشاء يتم التحكم في تردد ضخها بواسطة معالج دقيق ويتم تشغيلها بواسطة ملف كهرومغناطيسي، ويمكن استخدامها لنقل مجموعة متنوعة من السوائل الكيميائية بدقة.

المميزات

  • Automatic voltage compensation and overvoltage protection.
  • · It has a continuous non-volatile memory and needs no battery.
  • · Can choose internal (manual) or external control mode.
  • · Microcomputer control for accurate metering, with 10–100% frequency adjustment of flow.
  • · Can be directly connected to DCS or FCS systems to realize computer remote control.
  • · Multiple pump head materials available: PVC, PTFE, stainless steel 304, stainless steel 316.
  • · Uses high-quality PTFE and rubber composite diaphragm with strong corrosion resistance, greatly increasing the service life of the diaphragm.

Applicable range

  • · Wastewater treatment for electroplating, circuit board and chemical industries.
  • · Addition of auxiliaries in production processes of metal, textile and paper industries.
  • · Chemical dosing in power plants, steel, petrochemicals and boiler systems.
  • · Swimming pool water treatment, reverse osmosis systems, industrial wastewater treatment, various factories, laboratories, etc. for quantitative dosing of chemical liquids.

Working principle

  • · The principle and characteristics of this series of products are mechanical diaphragm metering pumps driven by a motor through a worm gear, suitable for fluid metering in low-pressure applications.
  • · The diaphragm metering pump can completely isolate the over-flow liquid from the drive lubrication mechanism by means of the diaphragm, and adopts a high-tech structural design.
  • · The diaphragm metering pump can be infinitely adjusted within the range of 0–100% according to the needs of various processes, quantitatively conveying corrosive and non-corrosive liquids free of solid particles.
  • · The diaphragm metering pump uses a flexible diaphragm instead of a piston; driven by the drive mechanism, the diaphragm reciprocates back and forth, changing the pump chamber volume, and draws in and discharges liquid under the action of the inlet and outlet valves.

Performance parameters

Model Flow
(L/h)
Pressure
(Bar)
Pump speed
(min-1)
Power
( W )
Inlet/outlet diameter (mm)
DC-M 1/10 1 10 0-160 20 PVC/PVDF hose connector, 5*8 mm;
PTFEinternal threadconnector,1/2;
304/316 connector, 6 mm pipe sleeve,
inner diameter6mm,outer diameter11mm;
DC-M 4/8 3.8 7.6
DC-M 6/7 5 5
DC-M 8/5 8 5
DC-M 11/4 10 3
DC-M 15/2 15 2
DC-M 20/1 20 1

معرض المنتج

المنتجات ذات الصلة