شركة شنغهاي يازو للمضخات · شركة تصنيع مضخات متخصصة الخط الساخن: 021-57775777 الجوال: 15921707645 بريد إلكتروني: 34305982@qq.com
الرئيسية / مركز المنتجات / مضخة تفريغ / مضخة تفريغ مباشرة من النوع XZ

مضخة تفريغ مباشرة من النوع XZ

مضخة تفريغ

The XZ vacuum pump from Asia Pump Industry is a single-stage, rotary vane, oil-sealed vacuum pump. It is a basic piece of equipment used to evacuate gas from sealed containers in order to achieve a vacuum. With its innovative design and technology, this product not only offers low energy consumption, low noise, and high durability, but also features a thoughtful design that addresses environmental protection and the contamination of pumped gases.

  • الفئةمضخة تفريغ
  • الطرازمضخة تفريغ مباشرة من النوع XZ
  • الخط الساخن021-57775777 / 15921707645
  • البريد الإلكتروني34305982@qq.com

مقدمة المنتج

Product introduction

The XZ vacuum pump from Asia Pump Industry is a single-stage, rotary vane, oil-sealed vacuum pump. It is a basic piece of equipment used to evacuate gas from sealed containers in order to achieve a vacuum. With its innovative design and technology, this product not only offers low energy consumption, low noise, and high durability, but also features a thoughtful design that addresses environmental protection and the contamination of pumped gases.

Applicable range

  • · Used as a backing pump for small oil booster pumps, oil diffusion pumps and molecular pumps.
  • · Used for various vacuum operations such as air conditioning, refrigeration equipment repair, suction devices of medical instruments, printing machinery, vacuum packaging, vacuum thermoforming, physical and chemical experiments and small devices requiring a vacuum environment.
  • · Not suitable for pumping gases corrosive to ferrous metal, reacting chemically with the oil pump, containing particulate dust, or with excessive oxygen content, explosive and toxic gases.
  • · Cannot be used as a transfer pump (namely pumping from one container to another).

Precautions

  • · When the pump is not working (parked), block the inlet to prevent debris and dust from entering the pump.
  • · Keep the pump clean to prevent debris from entering; after long-term use the oil becomes dirty and the pump oil must be replaced.
  • · When replacing, unscrew the oil-proof screw, drain the dirty oil completely and then tighten the drain screw, adding clean vacuum pump oil to the midpoint of the oil level.
  • · If abnormal vacuum is found during pump operation, disassemble and repair it; however, this should be done under the guidance of personnel with some experience.
  • · After the pump has been working for a period of time, check whether the pump oil is still at the midpoint of the oil level; if insufficient, add oil; if the pump oil is found to be decomposed or contains debris, replace the oil as well.
  • · This vacuum pump uses a single-phase power supply; once connected to power, the pump works, but it is not suitable for long-term large-volume exhaust. After exhausting, let air into the pump to keep all parts balanced.

Performance parameters

Model

Flow

(L/s)

Limit pressure

(≦Pa)

Speed

(r/min)

Motor power

(kW)

Voltage

(V)

Suction diameter

(mm)

XZ-1 1 10 1440 0.15 220V 5

معرض المنتج

المنتجات ذات الصلة