شركة شنغهاي يازو للمضخات · شركة تصنيع مضخات متخصصة الخط الساخن: 021-57775777 الجوال: 15921707645 بريد إلكتروني: 34305982@qq.com
الرئيسية / مركز المنتجات / Diaphragm pump / QBK pneumatic diaphragm pump

QBK pneumatic diaphragm pump

Diaphragm pump

The QBK pneumatic diaphragm pump is a new type of conveying machine that uses compressed air as its power source. It can completely pump and extract various corrosive liquids. Its performance parameters are similar to those of imported pumps. It has been adopted by nearly 1,000 domestic petroleum, chemical, electronics, ceramics, and textile system units, and installed in various special applications to pump media that cannot be pumped by conventional pumps, all with satisfactory results. It can also be categorized into cast iron, stainless steel, aluminum alloy, fluoroplastic, and others according to user requirements.

  • الفئةDiaphragm pump
  • الطرازQBK pneumatic diaphragm pump
  • الخط الساخن021-57775777 / 15921707645
  • البريد الإلكتروني34305982@qq.com

مقدمة المنتج

Product introduction

The QBK pneumatic diaphragm pump is a new type of conveying machine that uses compressed air as its power source. It can completely pump and extract various corrosive liquids. Its performance parameters are similar to those of imported pumps. It has been adopted by nearly 1,000 domestic petroleum, chemical, electronics, ceramics, and textile system units, and installed in various special applications to pump media that cannot be pumped by conventional pumps, all with satisfactory results. It can also be categorized into cast iron, stainless steel, aluminum alloy, fluoroplastic, and others according to user requirements.

المميزات

  • · No priming water needed, can work immersed in the medium, with suction lift up to 5 m, head up to 50 m and outlet pressure ≥6 bar.
  • · Spacious flow channels with good passing performance, allowing a maximum particle diameter of 10 mm. When pumping mud or impurities, wear on the pump is minimal.
  • · The head and flow can be adjusted steplessly through the air valve opening (air pressure adjusted between 1 and 7 bar).
  • · This pump has no rotating parts and no shaft seal; the diaphragm completely separates the pumped medium from the pump's moving parts and working medium, so the conveyed medium will not leak outward.
  • · Simple structure and few wearing parts; this pump has a simple structure and is easy to install and maintain.
  • · Can convey relatively viscous liquids (viscosity below 10,000 centipoise).
  • · This pump does not need oil lubrication; even dry running has no effect on the pump, which is its biggest feature.
  • · Easy to use and reliable in operation; starting and stopping only requires simply opening and closing the gas valve.

Applicable range

  • · Peanut butter, pickles, mashed potato, red sausage, chocolate, hops and syrup.
  • · Various paints, pigments, glues and adhesives.
  • Various tiles, porcelain, bricks and ceramic glaze slip.
  • Various abrasives, corrosion agents and oil stain cleaners.
  • Various flammable and volatile liquids.
  • Various sewage, cement grouting and mortar.
  • Various strong acids, strong alkalis and strongly corrosive liquids.
  • · Various viscous pastes, emulsions and various ointment cosmetics.
  • · Pre-pressure devices for various solid-liquid separation equipment.

Performance parameters

Model Flow
(m³/h)
Head
(m)
Suction lift
(m)
Default inlet and outlet connection method Allowable passage
Particle diameter
(mm)
Maximum air supply
Pressure
(kg)
QBK-10 0-1 0-69 5 Threaded connection 1 7
QBK-15 0-1.5
QBK-20 0-3
QBK-25 0-9 2.5
QBK-40 0-10 4.5
QBK-50 0-20 Flanged connection 8
QBK-65 0-25
QBK-80 0-30 7 10
QBK-100 0-40
QBK-80I 0-50 0-84 10 8
QBK-100I 0-60 10
QBK-125 0-70 12

معرض المنتج

المنتجات ذات الصلة