The MP series of miniature magnetically driven circulation pumps are available in a wide range of models, from small to large, suitable for use in a variety of industrial systems and processes. Its reliability and superior performance enjoy a high reputation, and it represents the pinnacle of magnetic drive pump technology. The MP series magnetic drive pump features an attractive design, particularly with its bearings made from a specially formulated ceramic material that offers superior wear and corrosion resistance. This innovation overcomes the traditional limitation of magnetic drive pumps – the strict prohibition against no-load operation – ensuring both its advanced performance and safety. The rotational torque of the motor drives the impeller to operate through the attraction between the driving magnet and the driven magnet. The major drawback of the commonly used magnetic drive pumps today is that they cannot operate in the absence of liquid, otherwise the entire unit will be damaged, causing unnecessary trouble and inconvenience for the user. This pump operates with magnetic materials mounted on the coupling shaft and the impeller, respectively, which attract and couple with each other. It does not require a traditional mechanical shaft seal, and is therefore sealed. This eliminates the liquid leakage issues associated with traditional mechanical seal pumps...
The MP series miniature magnetic drive circulation pumps come in a wide range of models from small to large, suitable for various industrial systems and processes. With reliable and superior performance, they enjoy a high reputation and represent the pinnacle of magnetic pump technology. The MP magnetic pump features an attractive design, and in particular the bearings use a special ceramic formulation with strong wear and corrosion resistance, breaking through the 'no dry running' restriction of magnetic pumps and ensuring advanced performance and safety. The motor's rotational torque drives the impeller through the attraction between the driving and driven magnets. The major drawback of conventional magnetic drive pumps is that they cannot run without liquid, otherwise the entire unit will be destroyed, causing unnecessary trouble and worry for users. This pump operates with magnetic materials mounted respectively on the coupling shaft and the impeller that attract and couple with each other, eliminating the need for a traditional mechanical shaft seal and thus achieving complete sealing. It avoids the corrosion and contamination defects caused by liquid leakage in traditional mechanically sealed pumps, making it an ideal liquid transfer pump for industrial equipment.
| Model | connector Type |
Inlet and outlet dimensions | Maximum flow (L/min) 50Hz/60Hz |
Maximum head (m) 50Hz/60Hz |
Standard flow (L/min) 50Hz/60Hz |
Standard head (m) 50Hz/60Hz |
Specific gravity | Motor output (w) 50Hz/60Hz |
Voltage (V) |
| MP-6R | hose | 14 mm | 8/9 | 1/1.4 | 2.8/5 | 0.8 | <1.2 | 6 | Single-phase 220V |
| MP-6RZ | hose | 14 mm | 5.5/6 | 2.1/2.7 | 3.2/4.5 | 0.8 | <1.1 | 6 | Single-phase 220V |
| MP-6RM | thread | 1/2 inch | 8/9 | 1/1.4 | 2.8/5 | 0.8 | <1.2 | 6 | Single-phase 220V |
| MP-10RN | hose | 14 mm | 11/12 | 1.5/2.1 | 5/8 | 1 | <1.1 | 6 | Single-phase 220V |
| MP-10RM | thread | 1/2 inch | 11/12 | 1.5/2.1 | 5/8 | 1 | <1.1 | 6 | Single-phase 220V |
| MP-15R | hose | 16 mm | 16/19 | 2.7/3.4 | 8/12 | 1.5 | <1.3 | 10 | Single-phase 220V |
| MP-15RN | hose | 16 mm | 16/19 | 2.7/3.4 | 8/12 | 1.5 | <1.3 | 10 | Single-phase 220V |
| MP-15RM | thread | 1/2 inch | 16/19 | 2.4/3.4 | 8/12 | 1.5 | <1.3 | 10 | Single-phase 220V |
| MP-20R | hose | 18mm | 27/32 | 3.1/4.3 | 17/22 | 2 | <1.2 | 15 | Single-phase 220V |
| MP-20RM | thread | 1/2 inch | 27/32 | 3.1/4.3 | 17/22 | 2 | <1.2 | 15 | Single-phase 220V |
| MP-20RX | hose | 26mm | 46/52 | 1.8/2.5 | 30/40 | 1 | <1.3 | 15 | Single-phase 220V |
| MP-20RZ | hose | 18mm | 10/11 | 4.6/6.9 | 7/10 | 4 | <1.1 | 15 | Single-phase 220V |
| MP-20RZM | thread | 3/4 inch | 10/11 | 4.6/6.9 | 7/10 | 4 | <1.1 | 15 | Single-phase 220V |
| MP-30R | hose | 20mm | 33/38 | 3.8/5.4 | 16/25 | 2.5 | <1.3 | 25 | Single-phase 220V |
| MP-30RM | thread | 3/4 inch | 33/38 | 3.8/5.4 | 16/25 | 2.5 | <1.3 | 25 | Single-phase 220V |
| MP-30RX | hose | 26mm | 62/72 | 2.9/4.1 | 32/46 | 2 | <1.1 | 25 | Single-phase 220V |
| MP-30RXM | thread | 1 inch | 62/72 | 2.9/4.1 | 32/46 | 2 | <1.1 | 25 | Single-phase 220V |
| MP-30RZ | hose | 18mm | 15/17 | 8/11 | 10/14 | 6 | <1.1 | 25 | Single-phase 220V |
| MP-30RZM | thread | 3/4 inch | 15/17 | 8/11 | 10/14 | 6 | <1.1 | 25 | Single-phase 220V |
| MP-40R | hose | 20mm | 45/52 | 4.6/6.5 | 22/34 | 4 | <1.1 | 65 | 220v/380v |
| MP-40RM | thread | 3/4 inch | 45/52 | 4.6/6.5 | 22/34 | 4 | <1.1 | 65 | 220v/380v |
| MP-40RX | hose | 26mm | 75/85 | 3.3/4.7 | 47/65 | 2 | <1.1 | 65 | 220v/380v |
| MP-40RXM | thread | 1 inch | 75/85 | 3.3/4.7 | 47/65 | 2 | <1.1 | 65 | 220v/380v |
| MP-40RZ | hose | 18mm | 22/28 | 10/13.5 | 10 | 8 | <1.1 | 65 | 220v/380v |
| MP-40RZM | thread | 3/4 inch | 22/28 | 10/13.5 | 10 | 8 | <1.1 | 65 | 220v/380v |
| MP-55R | hose | 26mm | 60/70 | 5.6/8.2 | 30/45 | 4 | <1.2 | 90 | 220v/380v |
| MP-55RM | thread | 1 inch | 60/70 | 5.6/8.2 | 30/45 | 4 | <1.2 | 90 | 220v/380v |
| MP-55RZ | hose | 26mm | 25/28 | 10/14 | 15/22 | 8 | <1.1 | 90 | 220v/380v |
| MP-55RZM | thread | 3/4 inch | 25/28 | 10/14 | 15/22 | 8 | <1.1 | 90 | 220v/380v |
| MP-70R | hose | 26mm | 86/97 | 6.7/9.7 | 50/72 | 4 | <1.1 | 150/180 | 220v/380v |
| MP-70RM | thread | 1 inch | 86/97 | 6.7/9.7 | 50/72 | 4 | <1.1 | 150/180 | 220v/380v |
| MP-70RZ | hose | 20mm | 40/43 | 14.3/20.3 | 20/24 | 12 | <1.1 | 150/180 | 220v/380v |
| MP-70RZM | thread | 3/4 inch | 40/43 | 14.3/20.3 | 20/24 | 12 | <1.1 | 150/180 | 220v/380v |
| MP-100R | hose | 26mm | 120/130 | 8.6/11.6 | 60/70 | 7/9 | <1.3 | 250/265 | 220v/380v |
| MP-100RM | thread | 1 inch | 120/130 | 8.6/11.6 | 60/70 | 7/9 | <1.3 | 250/265 | 220v/380v |
| MP-100RX | thread | 1¼ inch | 170 | 9 | 100 | 5 | <1.3 | 250 | 220v/380v |
| MP-120R | thread | 1½ inch | 220 | 10.5 | 140 | 6 | <1.3 | 370 | 220v/380v |
| MPH-400 | thread | 40 | 260 | 12.5 | 150 | 8.5 | <1.3 | 400 | 380V |
| MPH-401 | thread/flange | 40 | 330 | 18/18.5 | 200 | 12 | <1.05 | 750 | 220V/380V |
| MPH-422 | thread/flange | Inlet 50 / outlet 40 | 400 | 23/22 | 200 | 18.5 | <1.2 | 1500 | 380V |
| MPH-423 | thread/flange | Inlet 50 / outlet 40 | 500 | 24/22.5 | 300 | 20.5/19 | <1.2 | 2200 | 380V |
| MPH-425 | thread/flange | Inlet 50 / outlet 40 | 600 | 29/31 | 400 | 25.5/26.5 | <1 | 4000 | 380V |
| MPH-455 | thread/flange | Inlet 65 / outlet 50 | 750/850 | 29.5/31.5 | 630 | 20 | <1 | 4000 | 380V |



