Shanghai Yazhou Pump Manufacturing Co., Ltd. · Professional Pump Manufacturer Hotline: 021-57775777 Mobile: 15921707645 Email: 34305982@qq.com
Home / Product Center / Vacuum pump / 2X Type Two-Stage Rotary Vane Vacuum Pump

2X Type Two-Stage Rotary Vane Vacuum Pump

Vacuum pump

The 2X series vacuum pumps from Asia Pump Industry are designed with a two-stage structure. Their operating performance consists of a high-pressure stage and a low-pressure stage. The suction inlet is connected to a vacuum vessel or vacuum equipment, and during operation, a significant amount of gas within the vessel is drawn in and discharged. When the equipment reaches a vacuum, the high-pressure stage exhaust valve flap closes, and the gas drawn in by the high-pressure stage is transferred to the second stage, where it is drawn in and discharged. This allows the vacuum equipment to achieve a certain level of vacuum. The technical parameter of this pump is 6×10ˉ² Pa. Depending on the user's application, a vacuum booster pump can be provided, with this pump serving as the backing pump. Due to the enhanced pumping capacity of the booster pump and the continuous pumping action of the backing pump, your equipment can achieve a higher vacuum level.

  • CategoryVacuum pump
  • Model2X Type Two-Stage Rotary Vane Vacuum Pump
  • Hotline021-57775777 / 15921707645
  • Email34305982@qq.com

Product Introduction

Product introduction

The 2X series vacuum pumps from Asia Pump Industry are designed with a two-stage structure. Their operating performance consists of a high-pressure stage and a low-pressure stage. The suction inlet is connected to a vacuum vessel or vacuum equipment, and during operation, a significant amount of gas within the vessel is drawn in and discharged. When the equipment reaches a vacuum, the high-pressure stage exhaust valve flap closes, and the gas drawn in by the high-pressure stage is transferred to the second stage, where it is drawn in and discharged. This allows the vacuum equipment to achieve a certain level of vacuum. The technical parameter of this pump is 6×10ˉ² Pa. Depending on the user's application, a vacuum booster pump can be provided, with this pump serving as the backing pump. Due to the enhanced pumping capacity of the booster pump and the continuous pumping action of the backing pump, your equipment can achieve a higher vacuum level.

Features

  • · Fast pumping speed, small size, light weight, low noise, easy maintenance, high ultimate vacuum and direct discharge to the atmosphere.
  • · A reliable dust-proof device: when debris passes through the dust-proof device, it can only fall around the outside of the device, ensuring normal pump operation and completely solving the phenomenon of debris entering the pump chamber and causing jamming.
  • · It is equipped with an air release valve with a perforated composite screw; simply unscrew the composite screw to clear the oil hole. It can also discharge debris and water vapor. It is fast and labor-saving, greatly improving work efficiency.

Applicable range

  • · Electronics, refrigeration, electric light sources, chemicals, medical treatment, thermos flasks, packaging, dewatering and drying industries.
  • · However, it cannot be used to pump gases with excessive oxygen content, explosive gases, gases corrosive to metal, gases that react chemically with vacuum oil, or gases containing particles or dust; nor can it be used as a transfer pump or compressor.

Performance parameters

Model Flow
(L/S)
Limit pressure
(≦Pa)
Motor power
(kW)
Pump speed
(r/min)
Suction diameter
(mm)
2X-4A 4 6×10-2 0.55-4 450 Internal thread G3/4, 6 fen (outer diameter 32 mm sleeve)
2X-8A 8 1.1-4 590 Internal thread G3/4, 6 fen (outer diameter 32 mm sleeve)
2X-8water-cooled 8 1.1-4 590 Internal thread G3/4, 6 fen (outer diameter 32 mm sleeve)
2X-8large type 8 1.1-6 590 Flange center distance 125 mm, inner diameter 80 mm
2X-15A 15 1.5-4 420 internal threadG1(outer diameter40mmsleeve)
15 2.2-4 420 internal threadG1(outer diameter40mmsleeve)
2X-15water-cooled 15 1.5-4 420 Internal thread G1 1/4 (outer diameter 40 mm sleeve)
2X-15large type 15 2.2-4 320 Flange center distance 125 mm, inner diameter 80 mm
2X-30water-cooled 30 3-4 420 Flange center distance 125 mm, inner diameter 80 mm
2X-70water-cooled 70 5.5-4 420 Flange center distance 125 mm, inner diameter 80 mm
2X-100 100 7.5-4 420 Flange center distance 125 mm, inner diameter 80 mm

Product Gallery

Related Products