Shanghai Yazhou Pump Manufacturing Co., Ltd. · Professional Pump Manufacturer Hotline: 021-57775777 Mobile: 15921707645 Email: 34305982@qq.com
Home / Product Center / Screw pump / G-type Gearbox Reduction Screw Pump

G-type Gearbox Reduction Screw Pump

Screw pump

The G-type gearbox reduction screw pump is a new type of pump that operates on the principle of positive displacement with rotating engagement. Its main working components are the eccentric screw (rotor) and the stationary liner (stator). Due to the special geometric shapes of these two components, separate sealed cavities are formed. The medium flows uniformly in the axial direction, with a low internal flow velocity, low noise, constant volume, and stable pressure. Consequently, no turbulence or agitation occurs, and the inherent structure of the medium remains intact. Since the stator is made of a variety of elastic materials, Asia Pump's gearbox reduction screw pump possesses characteristics that ordinary pumps cannot match when it comes to transporting high-viscosity fluids and media containing hard suspended particles or fibrous materials. Its flow rate is directly proportional to the rotational speed.

  • CategoryScrew pump
  • ModelG-type Gearbox Reduction Screw Pump
  • Hotline021-57775777 / 15921707645
  • Email34305982@qq.com

Product Introduction

Product introduction

The G-type gearbox reduction screw pump is a new type of pump that operates on the principle of positive displacement with rotating engagement. Its main working components are the eccentric screw (rotor) and the stationary liner (stator). Due to the special geometric shapes of these two components, separate sealed cavities are formed. The medium flows uniformly in the axial direction, with a low internal flow velocity, low noise, constant volume, and stable pressure. Consequently, no turbulence or agitation occurs, and the inherent structure of the medium remains intact. Since the stator is made of a variety of elastic materials, Asia Pump's gearbox reduction screw pump possesses characteristics that ordinary pumps cannot match when it comes to transporting high-viscosity fluids and media containing hard suspended particles or fibrous materials. Its flow rate is directly proportional to the rotational speed.

Product advantages

  • · Continuous low-pulsation transfer, unaffected by fluctuations in pressure and viscosity.
  • · Wide application range, capable of conveying flowing and even non-flowing materials. · The medium is not agitated, squeezed or sheared during pumping. · High efficiency, with the conveying volume proportional to the rotational speed and adjustable by frequency conversion. · Most liquids can be pumped with minimal agitation and pulsation. · Easy maintenance and overhaul, with high-pressure conveying capability.

Applicable range

  • · Petroleum industry: heavy oil transfer, oil-gas mixed transfer, oil-water separation and waste oil recovery systems.
  • · Chemicals and pharmaceuticals: various pastes, emulsions and suspensions.
  • · Environmental engineering: various wastewater transfer, dewatered sludge transfer, and metering dosing of flocculants and chemical agents.
  • · Mineral engineering: production equipment for titanium dioxide, kaolin and calcium carbonate.
  • · Food industry: dairy products, fruit juice, fruit puree, vegetable paste and beer.
  • · Papermaking industry: raw material equipment, pulp making and wastewater treatment.

Performance parameters

Model

Flow

(m³/h)

Pressure

(MPa)

Maximum allowable speed

(r/min)

Motor power

(kW)

Required NPSH

(m)

Inlet flange bore

(mm)

Outlet flange bore

(mm)

Allowable particle diameter

(mm)

Allowable fiber length

(mm)

G20-1 0.8 0.6 960 0.75 4 25 25 1.5 25
G20-2 1.2 1.5
G25-1 2 0.6 960 1.5 32 25 2 30
G25-2 1.2 2.2
G30-1 5 0.6 960 2.2 50 40 2.5 35
G30-2 1.2 3
G35-1 8 0.6 960 3 65 50 3 40
G35-2 1.2 4
G40-1 12 0.6 960 4 80 65 3.8 45
G40-2 1.2 5.5
G50-1 20 0.6 960 5.5 4.5 100 80 5 50
G50-2 1.2 7.5
G60-1 30 0.6 960 11 5 125 100 6 60
G60-2 1.2 15
G70-1 45 0.6 720 11 150 125 8 70
G70-2 1.2 15
G85-1 60 0.6 720 15 150 150 10 80
G85-2 1.2 450 22
G105-1 80 0.6 400 22 200 200 15 110
G105-2 1.2 350 30
G135-1 120 0.6 350 37 250 250 20 150
G135-2 1.2 280  

Related Products