Shanghai Yazhou Pump Manufacturing Co., Ltd. · Professional Pump Manufacturer Hotline: 021-57775777 Mobile: 15921707645 Email: 34305982@qq.com
Home / Product Center / Blow-down pump / PW, PWF Cantilevered Centrifugal Sewage Pumps

PW, PWF Cantilevered Centrifugal Sewage Pumps

Blow-down pump

The PW and PWF sewage pumps are single-stage, single-suction, cantilever centrifugal sewage pumps. The pump suction inlet is axially horizontal, and the pump discharge outlet can be installed horizontally or vertically as required. They mainly consist of pump cover, pump casing, impeller, shaft seal, shaft and bracket. The shaft seal adopts a novel single-face mechanical seal structure; the pump and motor are mounted on a common base and driven directly by the motor through an elastic coupling. The pump has the advantages of high efficiency, good energy-saving effect, stable operation, reliable performance and easy maintenance. The sewage pumps are all computer-designed and optimized; Yazhou Pump has stable technical strength, rich production experience and complete testing methods, thereby ensuring stable and reliable product quality.

  • CategoryBlow-down pump
  • ModelPW, PWF Cantilevered Centrifugal Sewage Pumps
  • Hotline021-57775777 / 15921707645
  • Email34305982@qq.com

Product Introduction

Product introduction

The PW and PWF sewage pumps are single-stage, single-suction, cantilever centrifugal sewage pumps. The pump suction inlet is axially horizontal, and the pump discharge outlet can be installed horizontally or vertically as required. They mainly consist of pump cover, pump casing, impeller, shaft seal, shaft and bracket. The shaft seal adopts a novel single-face mechanical seal structure; the pump and motor are mounted on a common base and driven directly by the motor through an elastic coupling. The pump has the advantages of high efficiency, good energy-saving effect, stable operation, reliable performance and easy maintenance. The sewage pumps are all computer-designed and optimized; Yazhou Pump has stable technical strength, rich production experience and complete testing methods, thereby ensuring stable and reliable product quality.

Applicable range

  • · The PW horizontal non-clogging sewage pump can convey sewage, wastewater containing suspended solid particles and long fibrous matter. The pump body is made of high-quality cast iron, with a medium temperature not exceeding 100°C.
  • · The PWF corrosion-resistant sewage pump can convey wastewater containing acidic, alkaline or other corrosive substances.
  • · Industries such as chemicals, petroleum, light industry, food, pharmaceuticals, brewing, environmental protection and wastewater treatment. The pump body and flow-passing parts are made of 304 stainless steel, with a medium temperature not higher than 100°C.

Usage method

  • · For assembly and disassembly, first check whether any parts have defects affecting assembly, then clean them before assembly.
  • · Prepare paper gaskets, screw plugs and pipe plugs and install them on the corresponding parts respectively.
  • · Install the sealing ring, shaft seal box, oil level gauge and oil hole cover, and felt ring into the pump cover, bearing body, bearing box and bearing cap respectively.
  • · First install the bearings on both ends of the shaft, then install them together into the bearing box, and finally install the bearing cover.
  • · Install in sequence the bearing body, bearings, oil seal ring and washer, impeller, gasket and impeller nut and tighten them, then install the pump body and pump cover. Disassembly is in the reverse order of assembly.
  • · Clean the oil and dirt from the base and place the base on the foundation.
  • · Check the base level with a level gauge, and shims can be used for leveling. Pour cement into the base and anchor bolt holes, then check whether the level matches the motor center.
  • · Pour cement into the base and anchor bolt holes. After the cement dries, check whether the base and anchor bolts are loose; after confirming they are proper, tighten the nuts and recheck the level.

Precautions

  • · The pump inlet and outlet pipes should be supported; the pump body must not be used as a support.
  • · A gate valve should be installed in the outlet pipeline, and a general trash rack should be installed at the inlet of the suction pipeline to prevent large stones and other objects from being sucked in and damaging the impeller.

Performance parameters

No. Model Flow
(m³/h)
Head
(m)
Speed
(r/min)
Power
(kW)
1 50PW65 14.5 16 1440 4
50PWF-65
2 50PW65 25 32 2900 4
50PWF-65
3 80PW100 56 13.5 1440 5.5
80PWF-100
4 80PW100 90 26 2900 11
80PWF-100
5 100PW125 100 12.5 1440 7.5
100PWF-125
6 2 1/2PW 60 9.5 1440 4
7 2 1/2PW 90 26 2900 15
8 2 1/2PW 90 43 2900 22
9 4PW 100 11 960 7.5
10 4PW 160 25.5 1460 30

Product Gallery

Related Products