Product introduction
The DC-M series solenoid metering pump is a diaphragm metering pump with a pumping frequency controlled by a microprocessor and driven by a solenoid. It can be used for the precise delivery of a wide range of chemical liquids.
Características
- Automatic voltage compensation and overvoltage protection.
- · It has a continuous non-volatile memory and needs no battery.
- · Can choose internal (manual) or external control mode.
- · Microcomputer control for accurate metering, with 10–100% frequency adjustment of flow.
- · Can be directly connected to DCS or FCS systems to realize computer remote control.
- · Multiple pump head materials available: PVC, PTFE, stainless steel 304, stainless steel 316.
- · Uses high-quality PTFE and rubber composite diaphragm with strong corrosion resistance, greatly increasing the service life of the diaphragm.
Applicable range
- · Wastewater treatment for electroplating, circuit board and chemical industries.
- · Addition of auxiliaries in production processes of metal, textile and paper industries.
- · Chemical dosing in power plants, steel, petrochemicals and boiler systems.
- · Swimming pool water treatment, reverse osmosis systems, industrial wastewater treatment, various factories, laboratories, etc. for quantitative dosing of chemical liquids.
Working principle
- · The principle and characteristics of this series of products are mechanical diaphragm metering pumps driven by a motor through a worm gear, suitable for fluid metering in low-pressure applications.
- · The diaphragm metering pump can completely isolate the over-flow liquid from the drive lubrication mechanism by means of the diaphragm, and adopts a high-tech structural design.
- · The diaphragm metering pump can be infinitely adjusted within the range of 0–100% according to the needs of various processes, quantitatively conveying corrosive and non-corrosive liquids free of solid particles.
- · The diaphragm metering pump uses a flexible diaphragm instead of a piston; driven by the drive mechanism, the diaphragm reciprocates back and forth, changing the pump chamber volume, and draws in and discharges liquid under the action of the inlet and outlet valves.
Performance parameters
| Model |
Flow (L/h) |
Pressure (Bar) |
Pump speed (min-1) |
Power ( W ) |
Inlet/outlet diameter (mm) |
| DC-M 1/10 |
1 |
10 |
0-160 |
20 |
PVC/PVDF hose connector, 5*8 mm; PTFEinternal threadconnector,1/2; 304/316 connector, 6 mm pipe sleeve, inner diameter6mm,outer diameter11mm; |
| DC-M 4/8 |
3.8 |
7.6 |
| DC-M 6/7 |
5 |
5 |
| DC-M 8/5 |
8 |
5 |
| DC-M 11/4 |
10 |
3 |
| DC-M 15/2 |
15 |
2 |
| DC-M 20/1 |
20 |
1 |