Shanghai Yazhou Pump Manufacturing Co., Ltd. · Fabricante profissional de bombas Linha direta: 021-57775777 Celular: 15921707645 E-mail: 34305982@qq.com
Início / Central de produtos / bomba de vácuo / Bomba de vácuo de acoplamento direto modelo 2XZ

Bomba de vácuo de acoplamento direto modelo 2XZ

bomba de vácuo

The 2XZ series vacuum pumps from Asia Pump Industry feature a two-stage direct-coupled structure. Direct-coupled vacuum pumps are among the fundamental devices used to evacuate gas from sealed containers. It can operate independently or serve as a backing pump for booster pumps, diffusion pumps, molecular pumps, etc., as a holding pump, or as a pre-pumping pump for titanium pumps. Its operating performance consists of two parts: the high-pressure stage and the low-pressure stage. Its suction port is connected to the vacuum equipment. During operation, a large amount of gas inside the container is sucked in and discharged. When the equipment reaches a vacuum, the high-pressure stage exhaust valve closes, and the gas at the high-pressure stage inlet is transferred to the second stage. Through suction and discharge by the second stage, the vacuum equipment can achieve a certain level of vacuum. This pump features high rotational speed, a small footprint, a compact structure, and convenient mobility for operation.

  • Categoriabomba de vácuo
  • ModeloBomba de vácuo de acoplamento direto modelo 2XZ
  • Linha direta021-57775777 / 15921707645
  • E-mail34305982@qq.com

Apresentação

Product introduction

The 2XZ series vacuum pumps from Asia Pump Industry feature a two-stage direct-coupled structure. Direct-coupled vacuum pumps are among the fundamental devices used to evacuate gas from sealed containers. It can operate independently or serve as a backing pump for booster pumps, diffusion pumps, molecular pumps, etc., as a holding pump, or as a pre-pumping pump for titanium pumps. Its operating performance consists of two parts: the high-pressure stage and the low-pressure stage. Its suction port is connected to the vacuum equipment. During operation, a large amount of gas inside the container is sucked in and discharged. When the equipment reaches a vacuum, the high-pressure stage exhaust valve closes, and the gas at the high-pressure stage inlet is transferred to the second stage. Through suction and discharge by the second stage, the vacuum equipment can achieve a certain level of vacuum. This pump features high rotational speed, a small footprint, a compact structure, and convenient mobility for operation.

Características

  • Small size, light weight and low noise.
  • · Can operate continuously for a long time at an ambient temperature of 5°C–40°C and an inlet pressure below 1.3×10³ Pa.
  • · Equipped with an gas ballast valve, able to pump a small amount of water vapor.
  • · Equipped with a double safety device for automatic oil return prevention (except 380V).

Applicable range

  • · Can be used in the manufacture of electronic vacuum devices and vacuum flasks, vacuum welding, printing, thermoforming, refrigeration equipment repair and instrumentation matching.
  • · Laboratories and testing rooms of professional institutions, colleges and universities in aerospace, semiconductors, coating, food packaging, drying, refrigeration, scientific research, medical, electronics, chemicals and pharmaceuticals.
  • · The pump is not suitable for pumping gases that are corrosive to metal, react chemically with pump oil, contain particulate dust, or have excessive oxygen content, are explosive or toxic.

Performance parameters

Model Flow
(L/S)
Limit pressure
(≦Pa)
Motor power
(kW)
Pump speed
(r/min)
Suction diameter
(mm)
2XZ-0.5 0.5 6×10-2 0.18 1400 Internal thread G1/2 (outer diameter 10 mm sleeve)
2XZ-1 1 0.25 1400 Internal thread G1/2 (outer diameter 10 mm sleeve)
2XZ-2 2 0.37 1400 Internal thread G1/2 (outer diameter 10 mm sleeve)
2XZ-4 4 0.55 1400 Internal thread G1/2 (outer diameter 10 mm sleeve)
2XZ-8 8 1.1 1400 KF40  quick-fit
2XZ-15 15 1.5 1400 KF40  quick-fit

Galeria

Produtos relacionados