Шанхайская компания Ячжоу Насосы · Производитель насосов Горячая линия: 021-57775777 Моб.: 15921707645 Эл. почта: 34305982@qq.com
Главная / Центр продукции / химический насос / Химический центробежный насос из нержавеющей стали типа IH

Химический центробежный насос из нержавеющей стали типа IH

химический насос

The IH-type chemical pump from Asia Pump Industry is a single-stage, single-suction, cantilevered centrifugal pump designed for transporting corrosive liquids with a viscosity similar to water and containing no solid particles. Its marked rated performance points and dimensional equivalents conform to international standards. It is an energy-saving product intended to replace and upgrade F-type corrosion-resistant pumps. It features a wide performance range, high efficiency, advanced levels of automation, intelligence, and digitization, and ease of maintenance. The pump body material options include stainless steel 304, stainless steel 316L, and duplex stainless steel.

  • Категорияхимический насос
  • МодельХимический центробежный насос из нержавеющей стали типа IH
  • Горячая линия021-57775777 / 15921707645
  • E-mail34305982@qq.com

Описание

Product introduction

The IH-type chemical pump from Asia Pump Industry is a single-stage, single-suction, cantilevered centrifugal pump designed for transporting corrosive liquids with a viscosity similar to water and containing no solid particles. Its marked rated performance points and dimensional equivalents conform to international standards. It is an energy-saving product intended to replace and upgrade F-type corrosion-resistant pumps. It features a wide performance range, high efficiency, advanced levels of automation, intelligence, and digitization, and ease of maintenance. The pump body material options include stainless steel 304, stainless steel 316L, and duplex stainless steel.

Особенности

  • The IH series pumps have 29 basic types, of which 22 are dual-speed (2900, 1450 r/min); after impeller diameter trimming in two forms A and B, they reach 112 specifications. They mainly consist of pump body, impeller, sealing ring, impeller nut, pump cover, sealing components, intermediate support, shaft, suspension components, etc. Driven directly by the motor through an extended coupling, they rotate clockwise when viewed from the motor end. The pump cover is fixed on the intermediate support by a spigot, and then clamped in the middle through the connection between the pump body and the intermediate support spigot. The pump body has axial suction and radial discharge, with foot support, and can be fixed directly on the base. The suspension components are fixed on the intermediate support by a spigot and supported on the base by suspension brackets. For ease of disassembly, an extended coupling is designed, so during maintenance it is not necessary to remove the inlet and outlet piping, the pump body and the motor; simply removing the intermediate coupling piece allows the rotor assembly to be withdrawn for overhaul.

Shaft seal type

  • The pump seal type uses a mechanical seal, selected by the user as needed; seal cavity dimensions and other shaft seal structures can also be made according to requirements, such as mechanical seals with bellows and auxiliary impeller seals.
  • · Mechanical seal: two types, single-face and double-face mechanical seals; water at a certain pressure is introduced into the seal chamber to flush the two friction faces and also to cool them.

Applicable range

  • · Conveys various corrosive or non-contaminating water-like media at temperatures from -20°C to 105°C.
  • · Suitable for chemicals, petroleum, metallurgy, power stations, food, pharmaceuticals, environmental protection, wastewater treatment and synthetic fiber industries.

Галерея

Похожие товары