Шанхайская компания Ячжоу Насосы · Производитель насосов Горячая линия: 021-57775777 Моб.: 15921707645 Эл. почта: 34305982@qq.com
Главная / Центр продукции / химический насос / Химический насос из стеклопластика типа FS

Химический насос из стеклопластика типа FS

химический насос

The FS-type horizontal fiberglass-reinforced plastic chemical pump features an advanced and rational structural design, a high degree of standardization, parts interchangeability, and strong interchangeability, making disassembly and maintenance very convenient. The components that come into contact with the medium are made of polyvinyl butyral-modified phenolic fiberglass, which is a phenolic fiberglass reinforced plastic part formed through high-temperature compression molding. The product has excellent properties such as light weight, high strength, non-deformation, temperature resistance, and corrosion resistance. In terms of corrosion resistance, it can partially replace precious metals such as molybdenum-containing stainless steel, titanium, and titanium alloys. Note: (FS fiberglass reinforced plastic chemical pumps cannot be used with alkaline media)

  • Категорияхимический насос
  • МодельХимический насос из стеклопластика типа FS
  • Горячая линия021-57775777 / 15921707645
  • E-mail34305982@qq.com

Описание

Product introduction

The FS-type horizontal fiberglass-reinforced plastic chemical pump features an advanced and rational structural design, a high degree of standardization, parts interchangeability, and strong interchangeability, making disassembly and maintenance very convenient. The components that come into contact with the medium are made of polyvinyl butyral-modified phenolic fiberglass, which is a phenolic fiberglass reinforced plastic part formed through high-temperature compression molding. The product has excellent properties such as light weight, high strength, non-deformation, temperature resistance, and corrosion resistance. In terms of corrosion resistance, it can partially replace precious metals such as molybdenum-containing stainless steel, titanium, and titanium alloys. Note: (FS fiberglass reinforced plastic chemical pumps cannot be used with alkaline media)

Особенности

  • · Transmission: driven directly by the motor through a claw elastic coupling.
  • · Shaft seal: uses a WB2 externally mounted F4 bellows mechanical seal, with reliable sealing and long service life.
  • · The parts in contact with the medium are made of phenolic FRP parts formed by high-temperature compression molding using polyvinyl butyral modified phenolic glass fiber.
  • · The transmission and rotation direction of the pump: driven directly by the motor through a claw elastic coupling; viewed from the motor end, the pump rotates clockwise.
  • · The FRP pump has advanced and reasonable structural design, a high degree of standardization, strong parts commonality and interchangeability, and is very convenient to disassemble and overhaul, featuring the characteristics of horizontal centrifugal pumps.
  • · The product has excellent properties of light weight, high strength, no deformation, temperature resistance and corrosion resistance; in anti-corrosion it can partially replace expensive metals such as molybdenum-bearing stainless steel, titanium and titanium alloys.

Selection basis

  • Common engineering materials such as ordinary steel, stainless steel, aluminum and lead corrode severely in hydrochloric acid and are unsuitable. Most plastics used in FS fiberglass reinforced plastic centrifugal pumps have excellent corrosion resistance to hydrochloric acid. One class of plastics can withstand hydrochloric acid of all concentrations at boiling point, such as phenolic resin, furan resin, polychlorotrifluoroethylene, polytetrafluoroethylene, perfluoroethylene-propylene and polyvinylidene fluoride. Phenolic resin (FRP) products have good corrosion resistance to non-oxidizing acids (hydrochloric acid, dilute sulfuric acid, phosphoric acid, etc.), salt solutions and water, but are not resistant to alkalis and oxidizing acids (nitric acid, chromic acid, etc.).

Applicable range

  • · Petrochemicals, smelting, dyes, printing and dyeing, pesticides, pharmaceuticals, rare earths, leather and other industries.
  • · Conveys various non-oxidizing acids (hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, butyric acid) and other corrosive media free of solid particles, not easy to crystallize, with a temperature not higher than 100°C.

Performance parameters

Model  Flow 
(m³/h)
 Head 
(m)
 Speed 
(r/min)
 Power 
(kW)
FS25×25-15 4 15 2900 0.75
FS40×32-20 6.3 20 2900 1.5
FS40×32-32 6.3 32 2900 2.2
FS50×40-16 7.2 13 2900 2.2
FS50×40-20 12.5 20 2900 3
FS50×32-35 12.5 35 2900 4
FS65×50-20 25 20 2900 3
FS65×50-32 25 32 2900 5.5
FS80×65-32 45 32 2900 7.5
FS80×65-32 50 32 2900 11
FS80×65-38 50 38 2900 11
FS100×80-50 100 50 2900 22
FS100×80-50 100 50 2900 30
FS100×80-32 100 32 2900 15
FS100×80-28 100 28 2900 11
FS125×100-32 180 32 2900 22
FS125×100-50 180 50 2900 30

Галерея

Похожие товары