Шанхайская компания Ячжоу Насосы · Производитель насосов Горячая линия: 021-57775777 Моб.: 15921707645 Эл. почта: 34305982@qq.com
Главная / Центр продукции / винтовой насос / Шнековый насос санитарного исполнения типа GF

Шнековый насос санитарного исполнения типа GF

винтовой насос

The G Series Hygienic Screw Pump is a new type of pump that operates on the principle of rotating meshing positive displacement. Its main working components are the eccentric screw (rotor) and the fixed liner (stator). Due to the special geometric shapes of these two components, separate sealed cavities are formed. The medium flows uniformly in the axial direction, with a low internal flow velocity, low noise, constant volume, and stable pressure. Consequently, no turbulence or agitation occurs, and the inherent structure of the medium remains undisturbed. Since the stator is made of a variety of elastic materials, Asia Pump's hygienic screw pumps possess characteristics that ordinary pumps cannot match when it comes to transporting high-viscosity fluids and media containing hard suspended particles or fibrous materials. Its flow rate is directly proportional to the rotational speed.

  • Категориявинтовой насос
  • МодельШнековый насос санитарного исполнения типа GF
  • Горячая линия021-57775777 / 15921707645
  • E-mail34305982@qq.com

Описание

Product introduction

The G Series Hygienic Screw Pump is a new type of pump that operates on the principle of rotating meshing positive displacement. Its main working components are the eccentric screw (rotor) and the fixed liner (stator). Due to the special geometric shapes of these two components, separate sealed cavities are formed. The medium flows uniformly in the axial direction, with a low internal flow velocity, low noise, constant volume, and stable pressure. Consequently, no turbulence or agitation occurs, and the inherent structure of the medium remains undisturbed. Since the stator is made of a variety of elastic materials, Asia Pump's hygienic screw pumps possess characteristics that ordinary pumps cannot match when it comes to transporting high-viscosity fluids and media containing hard suspended particles or fibrous materials. Its flow rate is directly proportional to the rotational speed.

Product advantages

  • · Continuous low-pulsation transfer, unaffected by fluctuations in pressure and viscosity.
  • · Wide application range, capable of conveying flowing and even non-flowing materials. · The medium is not agitated, squeezed or sheared during pumping. · High efficiency, with the conveying volume proportional to the rotational speed and adjustable by frequency conversion. · Most liquids can be pumped with minimal agitation and pulsation. · Easy maintenance and overhaul, with high-pressure conveying capability.

Applicable range

  • · Petroleum industry: heavy oil transfer, oil-gas mixed transfer, oil-water separation and waste oil recovery systems.
  • · Chemicals and pharmaceuticals: various pastes, emulsions and suspensions.
  • · Environmental engineering: various wastewater transfer, dewatered sludge transfer, and metering dosing of flocculants and chemical agents.
  • · Mineral engineering: production equipment for titanium dioxide, kaolin and calcium carbonate.
  • · Food industry: dairy products, fruit juice, fruit puree, vegetable paste and beer.
  • · Papermaking industry: raw material equipment, pulp making and wastewater treatment.

Performance parameters

Model Flow Pressure Motor power Speed Inlet Outlet
(m³/h) (MPa) (kW) (r/min) (mm) (mm)
G20-1F 0.8 0.6 0.75 960 25 25
G20-2F 0.8 1.2 1.5 960 25 25
G25-1F 2 0.6 1.5 960 32 25
G25-2F 2 1.2 2.2 960 32 25
G30-1F 5 0.6 2.2 960 50 40
G30-2F 5 1.2 3 960 50 40
G35-1F 8 0.6 3 960 65 50
G35-2F 8 1.2 4 960 65 50
G40-1F 12 0.6 4 960 80 65
G40-2F 12 1.2 5.5 960 80 65
G50-1F 20 0.6 5.5 960 100 80
G50-2F 20 1.2 7.5 960 100 80
G60-1F 30 0.6 11 960 125 100
G60-2F 22 1.2 11 720 125 100
G70-1F 38 0.6 11 720 150 125

Галерея

Похожие товары