บริษัทเซี่ยงไฮ้ ย่าโจว ปั๊ม จำกัด · ผู้ผลิตปั๊มมืออาชีพ สายด่วน: 021-57775777 มือถือ: 15921707645 อีเมล: 34305982@qq.com
หน้าแรก / ศูนย์ผลิตภัณฑ์ / ปั๊มน้ำมัน / KCB ปั๊มน้ำมันแบบเฟือง

KCB ปั๊มน้ำมันแบบเฟือง

ปั๊มน้ำมัน

The KCB gear pump from Asia Pump Industry is suitable for pumping various types of oil, such as heavy oil, diesel, and lubricating oil. When equipped with copper gears, it can transport liquids with low flash points, such as gasoline, benzene, etc. Stainless steel gear pumps can handle beverages and corrosive liquids, but are not suitable for fluids containing hard particles or fibers. They are suitable for viscosities ranging from 5x10⁻⁶ to 1.5x10⁻³ m²/s (5-1500 cSt). The temperature should not exceed 300°C. If high-temperature liquids need to be pumped, please use a high-temperature-resistant gear pump for single-stage, single-suction oil pumps, which can handle liquids below 300°C. The pump can be equipped with a safety valve, which provides safety protection in the event of an overload. The shaft seal is available in three types: lip seal, mechanical seal, and packing seal.

  • หมวดหมู่ปั๊มน้ำมัน
  • รุ่นKCB ปั๊มน้ำมันแบบเฟือง
  • สายด่วน021-57775777 / 15921707645
  • อีเมล34305982@qq.com

แนะนำสินค้า

Product introduction

The Yazhou KCB gear pump is suitable for conveying various oils such as heavy oil, diesel and lubricating oil. With copper gears it can convey low-flash-point liquids such as gasoline and benzene. The stainless steel gear pump can convey beverages and corrosive liquids; it is not suitable for liquids containing hard particles or fibers. The applicable viscosity is 5×10⁻⁶ to 1.5×10⁻³ m²/s (5–1500 cSt). The temperature should not exceed 300°C; if high-temperature liquids need to be conveyed, use a high-temperature-resistant gear oil pump, which can convey liquids below 300°C. The pump can be equipped with a safety valve for protection against overload, and the shaft seal is available in three types: skeleton oil seal, mechanical seal and packing seal.

คุณสมบัติ

  • · Simple and compact structure, easy to use and maintain. With good self-priming performance, liquid must be poured before each start.
  • · Lubrication is achieved automatically by the conveyed liquid, so no additional lubricating liquid is needed in daily operation.
  • · Using an elastic coupling to transmit power can compensate for small deviations caused during installation. When the oil pump is subjected to unavoidable hydraulic shock during operation, it can play a good buffering role.

Performance parameters

Model caliber
(mm)
Flow Specified pressure
(Mpa)
Motor power
(kW)
Suction lift
(m)
Connector specification or
Matching flange specification
Oil seal
Model
(m³/h) (r/min)
KCB-18.3 3/4" 1.1 18.3 1.45 1.5-4 5 thread 22*35*10
KCB-33.3 3/4" 2 33.3 1.45 2.2-4 5
KCB-55 1" 3.3 55 0.33 1.5-4 5
KCB-83.3 1.5" 5 83.3 0.33 2.2-4 5
KCB-135 2" 8 135 0.33 2.2-6 5 DN40/PN10 or DN50/PN6 national standard flange 30*50*10
KCB-200 2" 12 200 0.33 4-4 5
KCB-200 2" 12 200 0.5 5.5-4 5
KCB-300 3" 18 300 0.36 5.5-6 5 DN65/PN10marine standardflange 35*55*10
KCB-483.3 3" 29 483.3 0.36 7.5-4 5
11-4 5
KCB-633 4" 38 633 0.28 11-6 5 DN80/PN16national standardflange 40*60*10
KCB-960 4" 58 960 0.28 18.5-4 5
22-4

ผลิตภัณฑ์ที่เกี่ยวข้อง