บริษัทเซี่ยงไฮ้ ย่าโจว ปั๊ม จำกัด · ผู้ผลิตปั๊มมืออาชีพ สายด่วน: 021-57775777 มือถือ: 15921707645 อีเมล: 34305982@qq.com
หน้าแรก / ศูนย์ผลิตภัณฑ์ / ปั๊มถังน้ำมัน / ปั๊มโคลนแบบนิวเมติกส์รุ่น FY

ปั๊มโคลนแบบนิวเมติกส์รุ่น FY

ปั๊มถังน้ำมัน

The FY pneumatic slurry pump from Asia Pump Industry utilizes the effect of air pressure differential to move the piston up and down, driving the opening and closing of the feed piston, thereby achieving the function of material lifting. Adjust the flow rate and air pressure of the working gas supplied to the pneumatic slurry pump to control and regulate the feed flow rate of the pneumatic slurry pump. Combining the pneumatic and hydraulic control systems enables automated operation. The pump body is made of stainless steel. It features corrosion resistance, anti-sedimentation, low noise, and energy efficiency. The FY pneumatic slurry pump is an ideal mobile conveying equipment.

  • หมวดหมู่ปั๊มถังน้ำมัน
  • รุ่นปั๊มโคลนแบบนิวเมติกส์รุ่น FY
  • สายด่วน021-57775777 / 15921707645
  • อีเมล34305982@qq.com

แนะนำสินค้า

Product introduction

The FY pneumatic slurry pump from Asia Pump Industry utilizes the effect of air pressure differential to move the piston up and down, driving the opening and closing of the feed piston, thereby achieving the function of material lifting. Adjust the flow rate and air pressure of the working gas supplied to the pneumatic slurry pump to control and regulate the feed flow rate of the pneumatic slurry pump. Combining the pneumatic and hydraulic control systems enables automated operation. The pump body is made of stainless steel. It features corrosion resistance, anti-sedimentation, low noise, and energy efficiency. The FY pneumatic slurry pump is an ideal mobile conveying equipment.

Usage method

  • · First correctly place the feed pipe into the material drum to be conveyed, then connect the corrosion-resistant hose from the material port to the feeding location.
  • · With the inlet valve closed, connect the air source pipe to the inlet connector, then open the inlet valve according to the required slurry flow to adjust the operating frequency of the pneumatic slurry pump, and it will work.

Applicable range

  • · Suitable for conveying liquid slurry with a high viscosity (VIS) of 120,000 CPS at 25°C.
  • · Applied in leather, textiles, printing and dyeing, plastics, wallpaper, coatings, color-coated sheets, color steel tiles, cosmetics, food, pharmaceuticals, chemicals, spray painting, film aluminum plating, glass, plastics, petroleum, mining, shipbuilding, automobiles, communications, electrical refrigeration and other industries.

Precautions

  • · During operation, if the cylinder body becomes hot (to the touch), immediately add or replace with No. 30 lubricating oil.
  • · If not used for a long time, before storage clean it with solvent while in working condition to prevent the slurry from freezing and blocking the feed pipe.
  • · During use, the pneumatic slurry pump should avoid impacting the cylinder body to prevent deformation, piston jamming and scrapping.
  • · During use, if seal wear causes material leakage, adjust the adjusting nut in time or replace the PTFE adjusting seal gasket.

Performance parameters

ชื่อ Model

Flow

(m³/h)

Head

(m)

Power

(kW)

caliber

(mm)

Pump body material Remarks

Pneumatic slurry pump

FY0.8T 0.8 100 Air source 51/32 Stainless steel  
FY1.2T-1 1.2 100 Air source 60/32 Stainless steel  
FY1.2T-2 1.2 100 Air source 55/32 Stainless steel Standard 200 L drum threaded connector
FY3.2T-1 3.2 100 Air source 72/38 Stainless steel Can convey media with viscosity up to 120,000 CPS
FY3.2T-2 3.2 100 Air source 55/32 Stainless steel Standard 200 L drum threaded connector
FY5.0T 5 100 Air source 88/50 Stainless steel  

แกลเลอรีสินค้า

ผลิตภัณฑ์ที่เกี่ยวข้อง