บริษัทเซี่ยงไฮ้ ย่าโจว ปั๊ม จำกัด · ผู้ผลิตปั๊มมืออาชีพ สายด่วน: 021-57775777 มือถือ: 15921707645 อีเมล: 34305982@qq.com
หน้าแรก / ศูนย์ผลิตภัณฑ์ / ปั๊มแม่เหล็ก / CQB Magnetic Drive Centrifugal Pump

CQB Magnetic Drive Centrifugal Pump

ปั๊มแม่เหล็ก

ปั๊มแรงเหวี่ยงขับเคลื่อนด้วยแรงแม่เหล็ก CQB (เรียกสั้นๆ ว่าปั๊มแม่เหล็ก) โดยทั่วไปประกอบด้วยมอเตอร์ คัปปลิ้งแม่เหล็ก และปั๊มแรงเหวี่ยงที่ทนต่อการกัดกร่อน ลักษณะหลักของปั๊มนี้คือการใช้ข้อต่อแม่เหล็กในการส่งกำลัง ซึ่งไม่มีการรั่วไหลเลย เมื่อมอเตอร์ขับเคลื่อนแม่เหล็กถาวรภายนอกของข้อต่อแม่เหล็กให้หมุน เส้นแรงแม่เหล็กจะผ่านช่องว่างและปลอกกั้น แล้วออกแรงกระทำต่อแม่เหล็กถาวรภายใน ทำให้โรเตอร์ของปั๊มหมุนพร้อมกับมอเตอร์ และส่งแรงบิดโดยไม่มีการสัมผัสเชิงกล ที่ปลายด้านเข้าของกำลังของเพลาปั๊ม เนื่องจากของเหลวถูกปิดไว้ในปลอกกั้นแบบคงที่ จึงไม่มีซีลแบบไดนามิกและไม่มีการรั่วไหลเลย

  • หมวดหมู่ปั๊มแม่เหล็ก
  • รุ่นCQB Magnetic Drive Centrifugal Pump
  • สายด่วน021-57775777 / 15921707645
  • อีเมล34305982@qq.com

แนะนำสินค้า

Product introduction

ปั๊มแรงเหวี่ยงขับเคลื่อนด้วยแรงแม่เหล็ก CQB (เรียกสั้นๆ ว่าปั๊มแม่เหล็ก) โดยทั่วไปประกอบด้วยมอเตอร์ คัปปลิ้งแม่เหล็ก และปั๊มแรงเหวี่ยงที่ทนต่อการกัดกร่อน ลักษณะหลักของปั๊มนี้คือการใช้ข้อต่อแม่เหล็กในการส่งกำลัง ซึ่งไม่มีการรั่วไหลเลย เมื่อมอเตอร์ขับเคลื่อนแม่เหล็กถาวรภายนอกของข้อต่อแม่เหล็กให้หมุน เส้นแรงแม่เหล็กจะผ่านช่องว่างและปลอกกั้น แล้วออกแรงกระทำต่อแม่เหล็กถาวรภายใน ทำให้โรเตอร์ของปั๊มหมุนพร้อมกับมอเตอร์ และส่งแรงบิดโดยไม่มีการสัมผัสเชิงกล ที่ปลายด้านเข้าของกำลังของเพลาปั๊ม เนื่องจากของเหลวถูกปิดไว้ในปลอกกั้นแบบคงที่ จึงไม่มีซีลแบบไดนามิกและไม่มีการรั่วไหลเลย

Applicable range

  • · Petroleum, chemicals, pharmaceuticals, smelting, electroplating, environmental protection, food, film processing, water treatment, national defense and other industries.
  • · Conveys flammable, explosive, volatile, toxic, rare and precious liquids and various corrosive liquids.

Instructions for use

  • · The magnetic drive pump should be installed horizontally, not vertically; the plastic pump body must not bear the weight of piping; for special cases requiring vertical installation, the motor must face upward.
  • · When the suction liquid level is above the pump axis, simply open the suction pipeline valve before starting the magnetic drive pump; if the suction liquid level is below the pump axis, the pipeline needs a foot valve.
  • · Before use, the magnetic drive pump should be inspected: the motor fan blades should rotate flexibly without jamming or abnormal noise, and all fasteners should be tightened.
  • · Check whether the motor rotation direction is consistent with the magnetic pump rotation mark.
  • · After the magnetic drive pump motor starts, slowly open the discharge valve; after the pump enters normal working condition, adjust the discharge valve to the required opening.
  • · Before the magnetic drive pump stops working, first close the discharge valve, then close the suction pipe valve.

Precautions

  • · Since the cooling and lubrication of the magnetic pump bearings rely on the conveyed medium, dry running is absolutely prohibited; also avoid no-load running caused by restarting after a power failure during operation.
  • · If the conveyed medium contains solid particles, a filter screen should be added at the magnetic drive pump inlet; if it contains ferromagnetic particles, a magnetic filter should be added.
  • · During use, the ambient temperature of the magnetic drive pump should be below 40°C and the motor temperature rise should not exceed 75°C.
  • · The conveyed medium and its temperature for the magnetic drive pump should be within the allowable range of the pump material. Engineering plastic pumps have a use temperature <60°C and metal pumps a use temperature <100°C.
  • · Conveys liquids with suction pressure not greater than 0.2 MPa, maximum working pressure 1.6 MPa, density not greater than 1600 kg/m³, particle size not greater than 30 × 10⁻⁶ m²/s, and free of hard particles and fibers.
  • · For magnetic drive pumps conveying media prone to sedimentation and crystallization, clean promptly after use and drain the accumulated liquid in the pump.
  • · After the magnetic drive pump has run for 100 hours, disassemble and inspect the wear of the bearings and the end-face rotating ring, and replace parts that are no longer usable.

Performance parameters

 No.  Model

 Flow 

 (m³/h)  

    Head    
   (m)    
Speed
(r/min)

  Power  

  (kW)  

1 CQB32-20-125 3.2 20 2900 1.5
2 CQB32-20-160 32 2.2
3 CQB32-25-200 50 4
4 CQB40-25-105 6.3 12.5 1.1
5 CQB40-25-125 20 2.2
6 CQB40-25-160 32 3
7 CQB40-25-200 50 5.5
8 CQB50-40-85 12.5 8 1.1
9 CQB50-32-105 12.5 1.5
10 CQB50-32-125 20 3
11 CQB50-32-160 32 4
12 CQB50-32-200 50 7.5
13 CQB50-32-250 80 18.5
14 CQB65-50-125 25 20 4
15 CQB65-50-160 32 7.5
16 CQB65-40-200 50 15
17 CQB65-40-250 80 22
18 CQB80-65-125 50 20 7.5
19 CQB80-65-160 32 15
20 CQB80-50-200 50 22
21 CQB80-50-250 80 37
22 CQB100-80-125 100 20 15
23 CQB100-80-160 32 22
24 CQB100-65-200 50 37
25 CQB100-65-250 80 55
26 CQB150-150-200 200 50 55
27 CQB200-200-400 400 32 1450 75

แกลเลอรีสินค้า

ผลิตภัณฑ์ที่เกี่ยวข้อง