شركة شنغهاي يازو للمضخات · شركة تصنيع مضخات متخصصة الخط الساخن: 021-57775777 الجوال: 15921707645 بريد إلكتروني: 34305982@qq.com
الرئيسية / مركز المنتجات / مضخة زيت / KCB مضخة زيت تروس

KCB مضخة زيت تروس

مضخة زيت

تُستخدم مضخة التروس KCB من شركة Asia Pump Industry لنقل أنواع مختلفة من الزيوت، مثل الزيت الثقيل، وزيت الديزل، وزيت التشحيم. يمكن استخدامها مع التروس النحاسية لنقل السوائل ذات نقاط الوميض المنخفضة، مثل البنزين والبنزين وما إلى ذلك. يمكن لمضخة التروس المصنوعة من الفولاذ المقاوم للصدأ ضخ المشروبات والسوائل المسببة للتآكل، ولكنها غير مناسبة للمواد التي تحتوي على جزيئات صلبة أو ألياف، وتكون اللزوجة المناسبة لها 5×10⁻⁶~1.5×10⁻³ م²/ث (5-1500 سنتي ستوك). يجب ألا تتجاوز درجة الحرارة 300 درجة مئوية. إذا كنت بحاجة إلى ضخ سوائل عالية الحرارة، فيرجى استخدام مضخة زيت تروس مقاومة لدرجات الحرارة العالية للمضخة أحادية المرحلة ذات الشفط الأحادي، والتي يمكنها ضخ السوائل التي تقل درجة حرارتها عن 300 درجة مئوية. يمكن تجهيز المضخة بصمام أمان للقيام بدور الحماية عند حدوث الحمل الزائد. يوجد ثلاثة أنواع من موانع التسرب الخاصة بعمود الدوران: مانع التسرب الهيكلي، مانع التسرب الميكانيكي ومانع التسرب بالحشو.

  • الفئةمضخة زيت
  • الطرازKCB مضخة زيت تروس
  • الخط الساخن021-57775777 / 15921707645
  • البريد الإلكتروني34305982@qq.com

مقدمة المنتج

Product introduction

The Yazhou KCB gear pump is suitable for conveying various oils such as heavy oil, diesel and lubricating oil. With copper gears it can convey low-flash-point liquids such as gasoline and benzene. The stainless steel gear pump can convey beverages and corrosive liquids; it is not suitable for liquids containing hard particles or fibers. The applicable viscosity is 5×10⁻⁶ to 1.5×10⁻³ m²/s (5–1500 cSt). The temperature should not exceed 300°C; if high-temperature liquids need to be conveyed, use a high-temperature-resistant gear oil pump, which can convey liquids below 300°C. The pump can be equipped with a safety valve for protection against overload, and the shaft seal is available in three types: skeleton oil seal, mechanical seal and packing seal.

المميزات

  • · Simple and compact structure, easy to use and maintain. With good self-priming performance, liquid must be poured before each start.
  • · Lubrication is achieved automatically by the conveyed liquid, so no additional lubricating liquid is needed in daily operation.
  • · Using an elastic coupling to transmit power can compensate for small deviations caused during installation. When the oil pump is subjected to unavoidable hydraulic shock during operation, it can play a good buffering role.

Performance parameters

Model caliber
(mm)
Flow Specified pressure
(Mpa)
Motor power
(kW)
Suction lift
(m)
Connector specification or
Matching flange specification
Oil seal
Model
(m³/h) (r/min)
KCB-18.3 3/4" 1.1 18.3 1.45 1.5-4 5 thread 22*35*10
KCB-33.3 3/4" 2 33.3 1.45 2.2-4 5
KCB-55 1" 3.3 55 0.33 1.5-4 5
KCB-83.3 1.5" 5 83.3 0.33 2.2-4 5
KCB-135 2" 8 135 0.33 2.2-6 5 DN40/PN10 or DN50/PN6 national standard flange 30*50*10
KCB-200 2" 12 200 0.33 4-4 5
KCB-200 2" 12 200 0.5 5.5-4 5
KCB-300 3" 18 300 0.36 5.5-6 5 DN65/PN10marine standardflange 35*55*10
KCB-483.3 3" 29 483.3 0.36 7.5-4 5
11-4 5
KCB-633 4" 38 633 0.28 11-6 5 DN80/PN16national standardflange 40*60*10
KCB-960 4" 58 960 0.28 18.5-4 5
22-4

المنتجات ذات الصلة