Product introduction
The Yazhou SZ water ring vacuum pump and compressor are used to draw or compress air and other non-corrosive gases insoluble in water, so as to create vacuum and pressure in a closed vessel. The gas drawn in may contain a small amount of liquid. Since the compression of gas in the working process is isothermal, there is little danger when compressing and pumping flammable and explosive gases, so its application is more widespread.
Applicable range
- Widely used in machinery, petrochemicals, pharmaceuticals, food, sugar industry and the electronics field.
Working principle
- The impeller is mounted eccentrically in the pump body. Water is injected into the pump to a certain level before startup, so when the impeller rotates, the water forms a rotating water ring on the pump body wall under centrifugal force. The upper inner surface of the water ring is tangent to the hub and rotates in the direction of the arrow. During the first half of the revolution, the inner surface of the water ring gradually separates from the hub, thus forming spaces between the impeller blades that gradually expand, so air is drawn in at the suction port. During the second half of the revolution, the inner surface of the water ring gradually approaches the hub, and the volume of the spaces between the blades shrinks, so the air between the blades is compressed and discharged. Thus, with each revolution of the impeller, the volume of the spaces between the blades changes once, and the water between the blades acts like a piston reciprocating once, so the pump continuously draws in gas.
Precautions
- · Regularly check the operation and lubrication of the ball bearings.
- · Clean the bearings at least once a year and replace all the lubricating oil.
- · A normally operating rolling bearing has a temperature 15–20°C above the ambient temperature, and the maximum must not exceed 55–60°C. A normally operating bearing should be oiled 3–4 times a year.
- · The packing should be compressed regularly. If the packing is worn and can no longer ensure the required sealing, replace it with new packing. The packing should not be compressed too tightly; normally compressed packing allows water to leak out in drops, but not too much. Use oil-soaked asbestos rope as packing.
Performance parameters
| Nome |
Model |
Flow (m³/min)
|
Power (kW) |
Speed
(r/min)
|
| SZ |
SZ-1 |
1 |
4-4 |
1440 |
| SZ-2 |
2 |
7.5-4 |
1440 |