Шанхайская компания Ячжоу Насосы · Производитель насосов Горячая линия: 021-57775777 Моб.: 15921707645 Эл. почта: 34305982@qq.com
Главная / Центр продукции / магнитный насос / Магнитный насос CQB-F из фторопласта

Магнитный насос CQB-F из фторопласта

магнитный насос

Проточные части магнитных насосов CQB-F из фторпластика изготовлены из фторпластикового сплава и могут непрерывно перекачивать агрессивные среды любой концентрации, такие как кислоты, щелочи и сильные окислители. Уплотнение вала отсутствует, а косвенный привод осуществляется с помощью магнитной муфты, что устраняет проблему утечек и не загрязняет место эксплуатации. Магнитный насос из фторопласта CQB-F обладает такими преимуществами, как компактная конструкция, привлекательный внешний вид, малые габариты, низкий уровень шума и надежная работа.

  • Категориямагнитный насос
  • МодельМагнитный насос CQB-F из фторопласта
  • Горячая линия021-57775777 / 15921707645
  • E-mail34305982@qq.com

Описание

Product introduction

Проточные части магнитных насосов CQB-F из фторпластика изготовлены из фторпластикового сплава и могут непрерывно перекачивать агрессивные среды любой концентрации, такие как кислоты, щелочи и сильные окислители. Уплотнение вала отсутствует, а косвенный привод осуществляется с помощью магнитной муфты, что устраняет проблему утечек и не загрязняет место эксплуатации. Магнитный насос из фторопласта CQB-F обладает такими преимуществами, как компактная конструкция, привлекательный внешний вид, малые габариты, низкий уровень шума и надежная работа.

Working principle

  • · The drive device uses a driving magnet coupling mounted directly on the motor shaft; the pump chamber is completely enclosed, and the impeller with magnets on the pump shaft is driven to rotate indirectly through magnetic coupling.
  • · Sturdy and durable pump body structure: although the parts in contact with liquid are fluoroplastic, the pump shell is metal, so the pump body can withstand the weight of piping and mechanical impact.

Instructions for use

  • · The magnetic pump should be installed horizontally, not vertically; the pump body must not bear the weight of piping; for special cases requiring vertical installation, the motor must face upward.
  • · When the suction liquid level is above the pump axis, simply open the suction pipeline valve before starting; if the suction liquid level is below the pump axis, the pipeline needs a foot valve.
  • · Before use, the pump should be inspected: the motor fan blades should rotate flexibly without jamming or abnormal noise, and all fasteners should be tightened.
  • · Check whether the motor rotation direction is consistent with the magnetic pump rotation mark.
  • · After the motor starts, slowly open the discharge valve; after the pump enters normal working condition, adjust the discharge valve to the required opening.
  • · Before the pump stops working, first close the discharge valve, then cut off the power.

Applicable range

  • · Petrochemical, acid and alkali production, nonferrous metal smelting, pickling processes in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, electroplating, radio and other industries.
  • · Use temperature: -20°C to 100°C.

Performance parameters

Specification and model

Flow

(m³/h)

Head

(m)

Power

(kW)

Specific gravity
CQB15-15-65Ffull-fluoro 0.8 3.2 0.18 ≤1
CQB20-15-75Ffull-fluoro 1.6 7 0.18 ≤1
CQB25-20-160FPTFE-lined 2 32 2.2 ≤1
CQB32-25-120Ffull-fluoro 3.2 15 1.1 ≤1
CQB32-25-125Ffull-fluoro 3.2 20 1.1 ≤1
CQB32-25-160FPTFE-lined 3.2 32 2.2 ≤1
CQB40-25-120Ffull-fluoro 6.3 15 1.1 ≤1
CQB40-25-125Ffull-fluoro 6.3 20 1.1 ≤1
CQB40-25-160FPTFE-lined 6.3 32 3 ≤1
CQB100-80-160FD PTFE-lined 6.3 50 5.5 ≤1
CQB50-32-125F full-fluorine, PTFE-lined 12.5 20 1.5 ≤1
CQB50-32-160FPTFE-lined 12.5 32 4 ≤1
CQB100-80-160FD PTFE-lined 12.5 50 7.5 ≤1
CQB50-32-250FPTFE-lined 12.5 80 15 ≤1
CQB65-50-125FPTFE-lined 25 20 3 ≤1
CQB65-50-125FPTFE-lined 25 20 4 ≤1.1
CQB65-50-125FPTFE-lined 25 20 5.5 ≤1.3
CQB65-50-150FPTFE-lined 25 25 4 ≤1
CQB65-50-160FPTFE-lined 25 32 4 ≤1
CQB65-50-160FPTFE-lined 25 32 5.5 ≤1.2
CQB100-80-160FD PTFE-lined 25 50 11 ≤1
CQB100-80-160FD PTFE-lined 50 20 7.5 ≤1
CQB100-80-160FD PTFE-lined 50 32 11 ≤1
CQB100-80-160FD PTFE-lined 50 50 18.5 ≤1
CQB100-80-160FD PTFE-lined 100 20 11 ≤1
CQB100-80-160FD PTFE-lined 100 32 18.5 ≤1
CQB100-80-160FD PTFE-lined 100 50 30 ≤1

Галерея

Похожие товары