Shanghai Yazhou Pump Manufacturing Co., Ltd. · Fabricante profissional de bombas Linha direta: 021-57775777 Celular: 15921707645 E-mail: 34305982@qq.com
Início / Central de produtos / bomba magnética / CQB-F de fluoroplástico bomba com acionamento magnético

CQB-F de fluoroplástico bomba com acionamento magnético

bomba magnética

The wetted parts of the CQB-F fluoroplastic magnetic drive pump are made of fluoroplastic alloy, allowing for the continuous conveyance of corrosive media such as acids, alkalis, and strong oxidizers of any concentration. The shaft seal has been eliminated, and indirect driving is achieved through magnetic coupling, which eliminates the problem of leakage and prevents contamination of the operating site. The CQB-F fluoroplastic magnetic drive pump offers advantages such as a compact structure, an attractive appearance, a small size, low noise, and reliable operation.

  • Categoriabomba magnética
  • ModeloCQB-F de fluoroplástico bomba com acionamento magnético
  • Linha direta021-57775777 / 15921707645
  • E-mail34305982@qq.com

Apresentação

Product introduction

The wetted parts of the CQB-F fluoroplastic magnetic drive pump are made of fluoroplastic alloy, allowing for the continuous conveyance of corrosive media such as acids, alkalis, and strong oxidizers of any concentration. The shaft seal has been eliminated, and indirect driving is achieved through magnetic coupling, which eliminates the problem of leakage and prevents contamination of the operating site. The CQB-F fluoroplastic magnetic drive pump offers advantages such as a compact structure, an attractive appearance, a small size, low noise, and reliable operation.

Working principle

  • · The drive device uses a driving magnet coupling mounted directly on the motor shaft; the pump chamber is completely enclosed, and the impeller with magnets on the pump shaft is driven to rotate indirectly through magnetic coupling.
  • · Sturdy and durable pump body structure: although the parts in contact with liquid are fluoroplastic, the pump shell is metal, so the pump body can withstand the weight of piping and mechanical impact.

Instructions for use

  • · The magnetic pump should be installed horizontally, not vertically; the pump body must not bear the weight of piping; for special cases requiring vertical installation, the motor must face upward.
  • · When the suction liquid level is above the pump axis, simply open the suction pipeline valve before starting; if the suction liquid level is below the pump axis, the pipeline needs a foot valve.
  • · Before use, the pump should be inspected: the motor fan blades should rotate flexibly without jamming or abnormal noise, and all fasteners should be tightened.
  • · Check whether the motor rotation direction is consistent with the magnetic pump rotation mark.
  • · After the motor starts, slowly open the discharge valve; after the pump enters normal working condition, adjust the discharge valve to the required opening.
  • · Before the pump stops working, first close the discharge valve, then cut off the power.

Applicable range

  • · Petrochemical, acid and alkali production, nonferrous metal smelting, pickling processes in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, electroplating, radio and other industries.
  • · Use temperature: -20°C to 100°C.

Performance parameters

Specification and model

Flow

(m³/h)

Head

(m)

Power

(kW)

Specific gravity
CQB15-15-65Ffull-fluoro 0.8 3.2 0.18 ≤1
CQB20-15-75Ffull-fluoro 1.6 7 0.18 ≤1
CQB25-20-160FPTFE-lined 2 32 2.2 ≤1
CQB32-25-120Ffull-fluoro 3.2 15 1.1 ≤1
CQB32-25-125Ffull-fluoro 3.2 20 1.1 ≤1
CQB32-25-160FPTFE-lined 3.2 32 2.2 ≤1
CQB40-25-120Ffull-fluoro 6.3 15 1.1 ≤1
CQB40-25-125Ffull-fluoro 6.3 20 1.1 ≤1
CQB40-25-160FPTFE-lined 6.3 32 3 ≤1
CQB100-80-160FD PTFE-lined 6.3 50 5.5 ≤1
CQB50-32-125F full-fluorine, PTFE-lined 12.5 20 1.5 ≤1
CQB50-32-160FPTFE-lined 12.5 32 4 ≤1
CQB100-80-160FD PTFE-lined 12.5 50 7.5 ≤1
CQB50-32-250FPTFE-lined 12.5 80 15 ≤1
CQB65-50-125FPTFE-lined 25 20 3 ≤1
CQB65-50-125FPTFE-lined 25 20 4 ≤1.1
CQB65-50-125FPTFE-lined 25 20 5.5 ≤1.3
CQB65-50-150FPTFE-lined 25 25 4 ≤1
CQB65-50-160FPTFE-lined 25 32 4 ≤1
CQB65-50-160FPTFE-lined 25 32 5.5 ≤1.2
CQB100-80-160FD PTFE-lined 25 50 11 ≤1
CQB100-80-160FD PTFE-lined 50 20 7.5 ≤1
CQB100-80-160FD PTFE-lined 50 32 11 ≤1
CQB100-80-160FD PTFE-lined 50 50 18.5 ≤1
CQB100-80-160FD PTFE-lined 100 20 11 ≤1
CQB100-80-160FD PTFE-lined 100 32 18.5 ≤1
CQB100-80-160FD PTFE-lined 100 50 30 ≤1

Galeria

Produtos relacionados