Shanghai Yazhou Pump Manufacturing Co., Ltd. · Professional Pump Manufacturer Hotline: 021-57775777 Mobile: 15921707645 Email: 34305982@qq.com
Home / Product Center / Others / 2QS Steam Reciprocating Pump

2QS Steam Reciprocating Pump

Others

Asia Pump Industry's electric reciprocating pump is a water pumping device powered by steam and operating on the principle of a piston pump. It is primarily used for feedwater in small and medium-sized boilers, transporting petroleum products in refineries, mine dewatering, and other applications. The cylinder working pressure of various steam reciprocating pumps is 1.4 MPa, and the discharge pressure is 1.7 MPa. They are suitable for saturated steam and superheated steam, with a steam temperature not exceeding 200°C. The water cylinder piston rings supplied with various steam reciprocating pumps are only suitable for water temperatures that do not exceed 60°C. For temperatures exceeding this limit but within 105°C, high-quality canvas interlayer packing must be used to replace the water cylinder piston rings. The theoretical suction lift of various steam reciprocating pumps is 10.3 meters, but in actual use, the suction lift, including pipe resistance, should not exceed 7 meters. When pumping hot water, the suction lift decreases as the water temperature rises. If the water temperature is too high or the pipe resistance is too great, the lowest water level in the intake tank must be higher than the straight centerline of the steam pump's steam cylinder and water cylinder.

Product Introduction

Product introduction

Asia Pump Industry's electric reciprocating pump is a water pumping device powered by steam and operating on the principle of a piston pump. It is primarily used for feedwater in small and medium-sized boilers, transporting petroleum products in refineries, mine dewatering, and other applications. The cylinder working pressure of various steam reciprocating pumps is 1.4 MPa, and the discharge pressure is 1.7 MPa. They are suitable for saturated steam and superheated steam, with a steam temperature not exceeding 200°C. The water cylinder piston rings supplied with various steam reciprocating pumps are only suitable for water temperatures that do not exceed 60°C. For temperatures exceeding this limit but within 105°C, high-quality canvas interlayer packing must be used to replace the water cylinder piston rings. The theoretical suction lift of various steam reciprocating pumps is 10.3 meters, but in actual use, the suction lift, including pipe resistance, should not exceed 7 meters. When pumping hot water, the suction lift decreases as the water temperature rises. If the water temperature is too high or the pipe resistance is too great, the lowest water level in the intake tank must be higher than the straight centerline of the steam pump's steam cylinder and water cylinder.

Working principle

  • A steam reciprocating pump is a direct-acting reciprocating pump powered by steam, generally of horizontal type. Its working principle is that steam enters the steam distribution chamber from the inlet pipe, then enters the cylinder through the steam inlet on the left side of the cylinder. Under steam pressure, the cylinder piston moves to the right, and the exhaust steam is discharged from the exhaust port on the right side of the cylinder into the exhaust chamber. As the cylinder piston moves, it pushes the pump chamber piston connected to the piston rod in the same direction, creating a vacuum in the left pump chamber of the water cylinder, and water is drawn into the left pump chamber through the suction pipe and the left inlet valve. At the same time, the right outlet valve opens to press the water out. When the cylinder piston reaches the right end position, the connecting rod moves left, closing the left steam inlet of the cylinder and opening the right steam inlet, allowing steam to enter, and the piston begins to move left again. The water pump piston draws water from the right side and discharges it from the left side. Through the continuous reciprocating motion of the water pump piston along with the cylinder piston, water is continuously sucked in and pressed out.

Applicable range

  • Reciprocating pumps are suitable for conveying high-head, small-flow, high-viscosity liquids, but are not suitable for corrosive liquids. Sometimes they are directly driven by a steam engine to convey flammable and explosive liquids.

Performance parameters

Model

Flow

(m³/h)

Cylinder diameter

(mm)

Water cylinder diameter

(mm)

Reciprocating stroke

(mm)

Reciprocations

(z/min)

2QS-3.5/17 2-4 80 50 75 75
2QS-4.8/17 3-6 115 70 102 38-70
2QS-9/17 5-11.5 133 89 127 30-64
2QS-15/17 6-16.5 152 102 152 30-60
2QS-21/17 11-20.5 190 110 200 30-50
2QS-29/17 16.5-29.5 190 130 200 30-50

Product Gallery

Related Products