شركة شنغهاي يازو للمضخات · شركة تصنيع مضخات متخصصة الخط الساخن: 021-57775777 الجوال: 15921707645 بريد إلكتروني: 34305982@qq.com
الرئيسية / مركز المنتجات / مضخة مغناطيسية / CQB-G High-Temperature Magnetic Centrifugal Pump (Water-Cooled)

CQB-G High-Temperature Magnetic Centrifugal Pump (Water-Cooled)

مضخة مغناطيسية

The CQB-G high-temperature magnetically driven centrifugal pump typically consists of four main components: a motor, a magnetic coupling, a water cooling unit, and a corrosion-resistant centrifugal pump. Its primary feature is the use of a magnetic coupling to transmit power. The use of a multi-circuit cooling structure ensures the reliability and stability of the prime mover and magnetic drive, while the use of a pin coupling reduces the noise and vibration of the pump. The simultaneous use of a quick-release coupling and a pin coupling increases the structural length of the circulating magnetic drive pump, which is more conducive to heat dissipation in the CQB-G series high-temperature magnetic drive pump. At the same time, the magnetically driven insulated pump also makes it very convenient for users to maintain or replace parts. A cooling fan blade is also designed in the outer rotor section of the circulating magnetic pump to ensure the stability of the magnetic steel. This series of circulating magnetic drive pumps is suitable for transporting high-temperature media with temperatures ≤300°C. This pump features a compact structure, an attractive appearance, a small size, low noise, reliable operation, and easy maintenance.

  • الفئةمضخة مغناطيسية
  • الطرازCQB-G High-Temperature Magnetic Centrifugal Pump (Water-Cooled)
  • الخط الساخن021-57775777 / 15921707645
  • البريد الإلكتروني34305982@qq.com

مقدمة المنتج

Product introduction

The CQB-G high-temperature magnetically driven centrifugal pump typically consists of four main components: a motor, a magnetic coupling, a water cooling unit, and a corrosion-resistant centrifugal pump. Its primary feature is the use of a magnetic coupling to transmit power. The use of a multi-circuit cooling structure ensures the reliability and stability of the prime mover and magnetic drive, while the use of a pin coupling reduces the noise and vibration of the pump. The simultaneous use of a quick-release coupling and a pin coupling increases the structural length of the circulating magnetic drive pump, which is more conducive to heat dissipation in the CQB-G series high-temperature magnetic drive pump. At the same time, the magnetically driven insulated pump also makes it very convenient for users to maintain or replace parts. A cooling fan blade is also designed in the outer rotor section of the circulating magnetic pump to ensure the stability of the magnetic steel. This series of circulating magnetic drive pumps is suitable for transporting high-temperature media with temperatures ≤300°C. This pump features a compact structure, an attractive appearance, a small size, low noise, reliable operation, and easy maintenance.

Applicable range

  • · Applied in petroleum, chemicals, pharmaceuticals, electroplating, printing and dyeing, food, scientific research and other industries.
  • · Pumping acids, alkalis, oils and rare precious liquids, toxic liquids and volatile liquids, and matching with circulating water equipment, especially for leakage-prone, explosive and flammable media.

Instructions for use

  • · Install horizontally and check the lubricating oil level in the cooling box; replenish it in time if the level is too low.
  • · Before starting the pump, first open the cooling water circuit; the opening of the inlet valve should be adjusted according to the temperature of the cooling outlet water after the pump operates normally.
  • · When the suction liquid level is above the pump axis, simply open the suction pipeline valve before starting; if the suction liquid level is below the pump axis, the pipeline needs a foot valve.
  • · Before use, the pump should be inspected: the motor fan blades should rotate flexibly without jamming or abnormal noise, and all fasteners should be tightened.
  • · Check whether the motor rotation direction is consistent with the magnetic pump rotation mark.
  • · After the motor starts, slowly open the discharge valve; after the pump enters normal working condition, adjust the discharge valve to the required opening.
  • · Before the pump stops working, first close the discharge valve, then cut off the power, and finally close the cooling water valve.

Precautions

  • · Since the cooling and lubrication of the magnetic pump bearings rely on the conveyed medium, dry running is absolutely prohibited; also avoid no-load running caused by restarting after a power failure during operation.
  • · If the conveyed medium contains solid particles, a filter screen should be added at the pump inlet; if it contains ferromagnetic particles, a magnetic filter should be added.
  • · The conveyed medium and its temperature should be within the allowable range of the pump material.
  • · Temperature <280°C, maximum working pressure 1.6 MPa, density not greater than 1840 kg/m³, viscosity not greater than 30 mm²/s, liquids free of hard particles and fibers.
  • · For media prone to sedimentation and crystallization, clean promptly after use and drain the accumulated liquid in the pump.
  • · After the magnetic pump has run normally for 1000 hours, disassemble and inspect the wear of the bearings and the end-face rotating ring, and replace parts that are no longer usable.
  • · Uses high-performance permanent magnet materials, which may pose potential hazards to the following devices; please keep the following devices away from this series of pumps, such as: pacemakers, credit cards and calculators.

Performance parameters

 No.  Model

 Flow 

 (m³/h)  

    Head    

   (m)    

Equipped motor power

(kW)

1 CQB-G32-20-125 3.2 20 1.5
2 CQB-G32-20-160 3.2 32 2.2
3 CQB-G32-25-200 3.2 50 4
4 CQB-G40-25-105 6.3 12.5 1.1
5 CQB-G40-25-125 6.3 20 2.2
6 CQB-G40-25-160 6.3 32 3
7 CQB-G40-25-200 6.3 50 5.5
8 CQB-G50-40-85 12.5 8 1.1
9 CQB-G50-32-105 12.5 12.5 1.5
10 CQB-G50-32-125 12.5 20 3
11 CQB-G50-32-160 12.5 32 4
12 CQB-G50-32-200 12.5 50 7.5
13 CQB-G50-32-250 12.5 80 18.5
14 CQB-G65-50-125 25 20 4
15 CQB-G65-50-160 25 32 7.5
16 CQB-G65-40-200 25 50 15
17 CQB-G65-40-250 25 80 22
18 CQB-G80-65-125 50 20 7.5
19 CQB-G80-65-160 50 32 15
20 CQB-G80-50-200 50 50 22
21 CQB-G80-50-250 50 80 37
22 CQB-G100-80-125 100 20 15
23 CQB-G100-80-160 100 32 22
24 CQB-G100-65-200 100 50 37
25 CQB-G100-65-250 100 80 55
26 CQB-G150-150-200 200 50 55
27 CQB-G200-200-400 400 32 75

معرض المنتج

المنتجات ذات الصلة