Шанхайская компания Ячжоу Насосы · Производитель насосов Горячая линия: 021-57775777 Моб.: 15921707645 Эл. почта: 34305982@qq.com
Главная / Центр продукции / Centrifugal pump / Центробежный насос из армированного полипропилена типа FP/FPZ

Центробежный насос из армированного полипропилена типа FP/FPZ

Centrifugal pump

The FPZ series pumps manufactured by Asia Pump Industry are molded in a single injection molding process, featuring high mechanical strength, strong corrosion resistance, and a uniquely scientific structure. The pump chamber is equipped with a suction chamber, a storage chamber, a return check valve, a gas-liquid separation chamber, and a return port. Priming is only required before the first start-up and does not need to be repeated afterward. During the suction and delivery of the medium, the liquid flow can be intermittent. If the liquid flow stops, it can resume suction and delivery within 15 minutes. The mechanical seal does not require additional cooling water. The operation is simple, safe, and leak-free, making it a suitable replacement for submersible pumps. The pump is made of non-toxic, non-polluting, reinforced polypropylene RPP (suitable for temperatures from -14°C to 100°C), ABS, and UPVC, and is molded in a single injection molding process.

  • КатегорияCentrifugal pump
  • МодельЦентробежный насос из армированного полипропилена типа FP/FPZ
  • Горячая линия021-57775777 / 15921707645
  • E-mail34305982@qq.com

Описание

Product introduction

The FPZ series pumps manufactured by Asia Pump Industry are molded in a single injection molding process, featuring high mechanical strength, strong corrosion resistance, and a uniquely scientific structure. The pump chamber is equipped with a suction chamber, a storage chamber, a return check valve, a gas-liquid separation chamber, and a return port. Priming is only required before the first start-up and does not need to be repeated afterward. During the suction and delivery of the medium, the liquid flow can be intermittent. If the liquid flow stops, it can resume suction and delivery within 15 minutes. The mechanical seal does not require additional cooling water. The operation is simple, safe, and leak-free, making it a suitable replacement for submersible pumps. The pump is made of non-toxic, non-polluting, reinforced polypropylene RPP (suitable for temperatures from -14°C to 100°C), ABS, and UPVC, and is molded in a single injection molding process.

Особенности

  • · Its structure is advanced, with light weight, small size and long life.
  • · It has the characteristics of small size, light weight, low power consumption, acid and alkali resistance, good sealing and easy maintenance.

Applicable range

  • · Chemicals, light industry, three-waste treatment, food, pharmaceuticals, papermaking, environmental protection and water treatment sectors.
  • · Conveys acids, alkalis, salts and other corrosive liquids.

Performance parameters

Model Flow
(m³/h)
Head
(m)
Power
(kW)
Voltage
(V)

Speed

(r/min)

caliber(mm)
Inlet Outlet
FP20-15-60 1 5 0.12 380 2900 20 15
FP20-20-90 3 6 0.37 380 20 20
FP32-25-100 5 7 0.55 220 32 25
FP32-25-105 6.3 8 0.75 380 32 25
FP32-25-110 8 14 1.1 380 32 25
FP40-32-125 12.5 20 1.5 380 40 32
FP50-40-145 13 22 2.2 380 50 40
FP65-50-150 25 25 4 380 65 50
50FP-22 13 22 2.2 380 2900 50 40
65FP-25 20 25 4 380 65 50
80FP-28 50 28 5.5 380 80 65
80FP-32 50 32 7.5 380 80 65

Галерея

Похожие товары