Product introduction
The KD series is a motor-driven mechanical diaphragm metering pump suitable for precise fluid metering in low-pressure applications. A variety of pump head materials are available. Mechanical diaphragm metering pumps use a diaphragm to separate the liquid from the drive lubrication mechanism, and the diaphragm is a static seal with no dynamic seal. Due to its high metering accuracy, stable performance, and stringent operating requirements, it is widely used in wastewater treatment, food additive dosing, and the conveyance of various special media.
المميزات
- Safe operation with mechanically driven diaphragm.
- · Good sealing, no leakage, simple and safe assembly and maintenance.
- · Flow adjustment can be achieved by adjusting the stroke length and motor frequency.
- · Multiple pump head materials available: PVC, PVDF, PTFE, stainless steel 304, stainless steel 316L.
- · Uses high-quality PTFE and rubber composite diaphragm with strong corrosion resistance; a stainless steel reinforcing plate is added behind the diaphragm to increase its service life.
- · The diaphragm metering pump is formed by pressing a multi-layer composite structure: the first layer is an ultra-tough Teflon acid-resistant film, the second layer is EPDM elastic rubber, the third layer is a 3 mm thick SUS304 supporting iron core, the fourth layer is reinforced with strengthened nylon fiber, and the fifth layer is completely wrapped with EPDM elastic rubber. This can effectively increase the service life of the diaphragm.
Working principle
- · The principle and characteristics of this series of products are mechanical diaphragm metering pumps driven by a motor through a worm gear, suitable for fluid metering in low-pressure applications.
- · The diaphragm metering pump can completely isolate the over-flow liquid from the drive lubrication mechanism by means of the diaphragm, and adopts a high-tech structural design.
- · The diaphragm metering pump can be infinitely adjusted within the range of 0–100% according to the needs of various processes, quantitatively conveying corrosive and non-corrosive liquids free of solid particles.
- · The diaphragm metering pump uses a flexible diaphragm instead of a piston; driven by the drive mechanism, the diaphragm reciprocates back and forth, changing the pump chamber volume, and draws in and discharges liquid under the action of the inlet and outlet valves.
Applicable range
- · Transfers high-viscosity media, corrosive liquids and hazardous chemicals.
- · Petrochemicals, chemicals, electric power, metallurgy, mining, shipbuilding, light industry, agriculture, national defense and other industries.
Performance parameters
| Model |
Flow |
Pressure |
Stroke |
Pump speed |
Power |
Inlet/outlet diameter |
Weight |
| (L/h) |
(MPa) |
(mm) |
(min-1) |
(kW) |
(mm) |
(kg) |
| KD 20/1.0 |
20 |
1.0 |
4 |
48 |
0.18 |
15 |
8 |
| KD 40/1.0 |
40 |
1.0 |
4 |
96 |
| KD 60/1.0 |
60 |
1.0 |
5 |
48 |
| KD 80/0.7 |
80 |
0.7 |
4 |
96 |
| KD 120/0.7 |
120 |
0.7 |
5 |
96 |
| KD 180/0.5 |
180 |
0.5 |
5 |
144 |
| KD 240/0.5 |
240 |
0.5 |
6 |
144 |
0.25 |