Shanghai Yazhou Pump Manufacturing Co., Ltd. · Professional Pump Manufacturer Hotline: 021-57775777 Mobile: 15921707645 Email: 34305982@qq.com
Home / Product Center / Blow-down pump / NL Type Sewage Slurry Pump

NL Type Sewage Slurry Pump

Blow-down pump

The NL series sewage and sludge pumps are single-stage, single-suction, vertical centrifugal pumps. Their main components include the volute casing, impeller, pump base, pump casing, support sleeve, motor base, and motor. The volute casing, pump base, motor base, and impeller nut are made of cast iron, offering good resistance to corrosion and ease of machining. The impeller is a semi-open three-blade structure. A semi-closed impeller is used, and malleable cast iron is employed, resulting in high strength, corrosion resistance, ease of machining, good flow passage, and high efficiency. To reduce weight and the amount of machining required, the pump shaft is made of high-quality carbon steel cold-drawn round steel. The pump base is equipped with four skeleton oil seals and shaft sleeves to prevent shaft wear and extend the service life of the shaft. It can be used vertically or at an angle, occupies a small footprint, and the volute casing needs to be submerged in the working medium to operate. It is easy to start and does not require priming. The direction of rotation should be clockwise when viewed from the rear of the motor. The overall length of the pump is available in various specifications, allowing users to select the most suitable option based on their specific application and local conditions.

Product Introduction

Product introduction

The NL series sewage and sludge pumps are single-stage, single-suction, vertical centrifugal pumps. Their main components include the volute casing, impeller, pump base, pump casing, support sleeve, motor base, and motor. The volute casing, pump base, motor base, and impeller nut are made of cast iron, offering good resistance to corrosion and ease of machining. The impeller is a semi-open three-blade structure. A semi-closed impeller is used, and malleable cast iron is employed, resulting in high strength, corrosion resistance, ease of machining, good flow passage, and high efficiency. To reduce weight and the amount of machining required, the pump shaft is made of high-quality carbon steel cold-drawn round steel. The pump base is equipped with four skeleton oil seals and shaft sleeves to prevent shaft wear and extend the service life of the shaft. It can be used vertically or at an angle, occupies a small footprint, and the volute casing needs to be submerged in the working medium to operate. It is easy to start and does not require priming. The direction of rotation should be clockwise when viewed from the rear of the motor. The overall length of the pump is available in various specifications, allowing users to select the most suitable option based on their specific application and local conditions.

Applicable range

  • · Mining, papermaking, printing and dyeing, environmental protection, graphite, mica, gold, ceramics, oil refining, petroleum, chemicals, farms, salt fields, iodine fields, dyeing, brewing, food, fertilizer and coking.
  • · Ore dressing, construction, marble plants, gold mines, mud, quicksand, ponds, sewage ponds, pumping thick liquids and suspended matter in sewage operations.
  • · If combined with a high-pressure water pump and water gun to form a hydraulic mechanized earthwork unit, it can be used for land leveling, dredging and excavation of rivers and ponds, and excavation and transportation in small water conservancy projects.
  • · Drainage and fluids containing mud blocks, urban air defense projects and underground projects.
  • · Used for fish farming with pond cleaning and fish pond aeration.

Instructions for use

  • · The power supply used must be a three-phase four-wire system; if there is no ground wire, one must be added to prevent leakage.
  • · During operation, a circuit fuse and switch matching the motor must be installed nearby to prevent the motor from burning out when the impeller is jammed by debris.
  • · When in use it can operate without installing any foundation device, as long as it leans firmly; if necessary, tie it with a rope to prevent accidents.
  • · After starting, check the motor rotation direction; do not run in reverse for more than one minute.
  • · When the liquid to be pumped contains a lot of weeds and other debris, remove them as much as possible in advance, and methods such as adding a wire basket can be adopted to prevent debris from being sucked into the pump and damaging or jamming the impeller.
  • · After pumping mud and other foul matter, run clean water through the pump for a short time to flush the pump body and the inside of the pipeline.
  • · When working outdoors, the motor should be fitted with a protective cover to prevent rain from entering the motor.
  • · For sucking mud from river or pond bottoms, it should be hung on a tripod and can be placed on a float or boat for mobile operation.
  • · During earthwork operations, the diameter of soil blocks broken by the high-pressure water jet must not exceed one third of the suction inlet.
  • · The specified rotational speed of this pump is the maximum speed and must not be increased arbitrarily; reducing the speed is not limited, but the efficiency is significantly lowered.
  • · When this sewage lift pump pumps thick mud, viscous liquid or long-distance high-head slurry, the load decreases, but the load cannot be increased by changing the structure.
  • · Generally, after about 1250 hours of operation, carry out regular maintenance of the pump: disassemble the pump base to check the bearings and the pump seal, clean and replace the grease, and replace the oil seal, shaft sleeve, etc. if necessary.
  • · When not used for a long time, disassemble the volute, dry the parts and coat the relative moving contact surfaces with thin oil, and store in a dry place for future use.

Performance parameters

Model

Speed

(r/min)

Flow

(m³/h)

Head

(m)

Motor power

(kW)

Total length of vertical pump

(mm)

NL50A-8 1430 20 8 1.5 1660
NL50A-12 1430 25 12 3 1690
NL50A-16 1430 20 16 3 1670
NL50A-20 1430 20 20 4 1680
NL50A-24 1430 35 24 5.5 1800
NL65A-16 1430 50 16 5.5 1810
NL65A-25 1430 50 25 11 1900
NL76A-9 1430 50 9 3 1700
NL76A-16 1430 50 16 5.5 1880
NL76A-20 1430 50 20 7.5 1890
NL80A-8 1430 60 8 4 1710
NL80A-12 1430 80 12 7.5 1860
NL80A-25 1430 80 25 11 1910
NL100A-7 1430 70 7 4 1710
NL100A-10 1430 100 10 7.5 1860
NL100A-16 1430 100 16 15 1930
NL100A-25 1430 100 25 18.5 1970
NL150A-12 1430 150 12 18.5 2070
NL150A-16 1430 150 16 22 2120

Product Gallery

Related Products