Шанхайская компания Ячжоу Насосы · Производитель насосов Горячая линия: 021-57775777 Моб.: 15921707645 Эл. почта: 34305982@qq.com
Главная / Центр продукции / насос для гидроиспытаний / SYL Manual Pressure Test Pump

SYL Manual Pressure Test Pump

насос для гидроиспытаний

The SYL manual pressure test pump is the main testing instrument for measuring pressure vessels and pressurized equipment, with a working pressure up to 80 MPa. It features a compact and reasonable structure, effortless operation, light weight and easy maintenance, greatly improving work efficiency. It mainly consists of pump body, plunger, sealing ring, control valve, pressure gauge and water tank; its main use is to measure the pressure of pipeline equipment and pressure vessels.

  • Категориянасос для гидроиспытаний
  • МодельSYL Manual Pressure Test Pump
  • Горячая линия021-57775777 / 15921707645
  • E-mail34305982@qq.com

Описание

Product introduction

The SYL manual pressure test pump is the main testing instrument for measuring pressure vessels and pressurized equipment, with a working pressure up to 80 MPa. It features a compact and reasonable structure, effortless operation, light weight and easy maintenance, greatly improving work efficiency. It mainly consists of pump body, plunger, sealing ring, control valve, pressure gauge and water tank; its main use is to measure the pressure of pipeline equipment and pressure vessels.

Applicable range

  • Widely used in boilers, chemicals, light industry, construction and installation engineering, aerospace and scientific systems for testing various pressure vessels and pressurized equipment, pipeline valves, rubber pipe fittings and other pressurized devices.

Usage matters

  • · Before the pressure test pump is used, check in detail whether all component connections are tightened, whether the pressure gauge is normal and whether the inlet and outlet pipes are properly installed.
  • · The working medium is clean water, emulsion or oil with kinematic viscosity <45 mm²/s at 5–50°C. It is forbidden to use unclean water containing sand, mud and other pollutants.
  • · To improve test efficiency, first fill the container or equipment to be tested with water, then connect the outlet pipe of the pressure test pump.
  • · During the pressure test, if a large amount of air is found in the water, open the drain valve to release the air.
  • · If any slight water seepage is found during the pressure test, stop work immediately for inspection and repair; it is strictly forbidden to continue increasing pressure while seepage is present.
  • · After the pressure test is finished, first loosen the drain valve to lower the pressure, so as not to damage the pressure gauge.
  • · When the pressure test pump is not in use, drain all the water from the pump and suck in a small amount of engine oil to prevent rust.

Performance parameters

Model Rated discharge pressure
(Mpa)
Flow per cycle
(ml/cycle)
Handle flow application force
(n)
Overall dimensions
(L×W×H mm)
SYL-40/1.6 1.6 40 ﹤300 320×165×410
SYL-39/2.5 2.5 39 ﹤300 320×165×410
SYL-32/4 4 32 ﹤300 340×165×460
SYL-31/6.3 6.3 31 ﹤300 340×165×460
SYL-22/10 10 22 ﹤300 380×185×510
SYL-13/16 16 13 ﹤300 380×185×510
SYL-12/20 20 12 ﹤300 380×185×510
SYL-9/25 25 9 ﹤300 380×185×510
SYL-7/40 40 7 ﹤400 380×200×620

Галерея

Похожие товары