شركة شنغهاي يازو للمضخات · شركة تصنيع مضخات متخصصة الخط الساخن: 021-57775777 الجوال: 15921707645 بريد إلكتروني: 34305982@qq.com
الرئيسية / مركز المنتجات / مضخة مغناطيسية / CQB-F من الفلوروبلاستيك مضخة بمحرك مغناطيسي

CQB-F من الفلوروبلاستيك مضخة بمحرك مغناطيسي

مضخة مغناطيسية

الأجزاء التي يمر بها السائل في المضخة المغناطيسية المصنوعة من البلاستيك الفلوري طراز CQB-F مصنوعة من سبيكة البلاستيك الفلوري، ويمكنها نقل الوسائط المسببة للتآكل مثل الأحماض والقلويات والمؤكسدات القوية بأي تركيز بشكل مستمر. تم إلغاء مانع تسرب العمود، ويتم التشغيل بشكل غير مباشر باستخدام اقتران مغناطيسي، مما يقضي على مشكلة التسرب وعدم تلويث موقع الاستخدام. تتميز المضخة المغناطيسية المصنوعة من البلاستيك الفلوري CQB-F بمزايا مثل الهيكل المدمج، والمظهر الجميل، والحجم الصغير، والضوضاء المنخفضة، والتشغيل الموثوق به.

  • الفئةمضخة مغناطيسية
  • الطرازCQB-F من الفلوروبلاستيك مضخة بمحرك مغناطيسي
  • الخط الساخن021-57775777 / 15921707645
  • البريد الإلكتروني34305982@qq.com

مقدمة المنتج

Product introduction

الأجزاء التي يمر بها السائل في المضخة المغناطيسية المصنوعة من البلاستيك الفلوري طراز CQB-F مصنوعة من سبيكة البلاستيك الفلوري، ويمكنها نقل الوسائط المسببة للتآكل مثل الأحماض والقلويات والمؤكسدات القوية بأي تركيز بشكل مستمر. تم إلغاء مانع تسرب العمود، ويتم التشغيل بشكل غير مباشر باستخدام اقتران مغناطيسي، مما يقضي على مشكلة التسرب وعدم تلويث موقع الاستخدام. تتميز المضخة المغناطيسية المصنوعة من البلاستيك الفلوري CQB-F بمزايا مثل الهيكل المدمج، والمظهر الجميل، والحجم الصغير، والضوضاء المنخفضة، والتشغيل الموثوق به.

Working principle

  • · The drive device uses a driving magnet coupling mounted directly on the motor shaft; the pump chamber is completely enclosed, and the impeller with magnets on the pump shaft is driven to rotate indirectly through magnetic coupling.
  • · Sturdy and durable pump body structure: although the parts in contact with liquid are fluoroplastic, the pump shell is metal, so the pump body can withstand the weight of piping and mechanical impact.

Instructions for use

  • · The magnetic pump should be installed horizontally, not vertically; the pump body must not bear the weight of piping; for special cases requiring vertical installation, the motor must face upward.
  • · When the suction liquid level is above the pump axis, simply open the suction pipeline valve before starting; if the suction liquid level is below the pump axis, the pipeline needs a foot valve.
  • · Before use, the pump should be inspected: the motor fan blades should rotate flexibly without jamming or abnormal noise, and all fasteners should be tightened.
  • · Check whether the motor rotation direction is consistent with the magnetic pump rotation mark.
  • · After the motor starts, slowly open the discharge valve; after the pump enters normal working condition, adjust the discharge valve to the required opening.
  • · Before the pump stops working, first close the discharge valve, then cut off the power.

Applicable range

  • · Petrochemical, acid and alkali production, nonferrous metal smelting, pickling processes in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, electroplating, radio and other industries.
  • · Use temperature: -20°C to 100°C.

Performance parameters

Specification and model

Flow

(m³/h)

Head

(m)

Power

(kW)

Specific gravity
CQB15-15-65Ffull-fluoro 0.8 3.2 0.18 ≤1
CQB20-15-75Ffull-fluoro 1.6 7 0.18 ≤1
CQB25-20-160FPTFE-lined 2 32 2.2 ≤1
CQB32-25-120Ffull-fluoro 3.2 15 1.1 ≤1
CQB32-25-125Ffull-fluoro 3.2 20 1.1 ≤1
CQB32-25-160FPTFE-lined 3.2 32 2.2 ≤1
CQB40-25-120Ffull-fluoro 6.3 15 1.1 ≤1
CQB40-25-125Ffull-fluoro 6.3 20 1.1 ≤1
CQB40-25-160FPTFE-lined 6.3 32 3 ≤1
CQB100-80-160FD PTFE-lined 6.3 50 5.5 ≤1
CQB50-32-125F full-fluorine, PTFE-lined 12.5 20 1.5 ≤1
CQB50-32-160FPTFE-lined 12.5 32 4 ≤1
CQB100-80-160FD PTFE-lined 12.5 50 7.5 ≤1
CQB50-32-250FPTFE-lined 12.5 80 15 ≤1
CQB65-50-125FPTFE-lined 25 20 3 ≤1
CQB65-50-125FPTFE-lined 25 20 4 ≤1.1
CQB65-50-125FPTFE-lined 25 20 5.5 ≤1.3
CQB65-50-150FPTFE-lined 25 25 4 ≤1
CQB65-50-160FPTFE-lined 25 32 4 ≤1
CQB65-50-160FPTFE-lined 25 32 5.5 ≤1.2
CQB100-80-160FD PTFE-lined 25 50 11 ≤1
CQB100-80-160FD PTFE-lined 50 20 7.5 ≤1
CQB100-80-160FD PTFE-lined 50 32 11 ≤1
CQB100-80-160FD PTFE-lined 50 50 18.5 ≤1
CQB100-80-160FD PTFE-lined 100 20 11 ≤1
CQB100-80-160FD PTFE-lined 100 32 18.5 ≤1
CQB100-80-160FD PTFE-lined 100 50 30 ≤1

معرض المنتج

المنتجات ذات الصلة