Product introduction
تم تصميم مضخة المواد الكيميائية العمودية GBL لحمض الكبريتيك المركز من شركة Asia Pump Industry بشكل مثالي بناءً على معلمات أداء المضخة الطردية من النوع IG، باستخدام نوعين من المواد وهما الحديد الزهر والصلب الكربوني المخصصين لحمض الكبريتيك المركز، بالإضافة إلى نموذج هيدروليكي ممتاز. إنها مضخة كيميائية مثالية من الجيل الجديد.
المميزات
- · The impeller is mounted directly on the extended motor shaft, with a short axial dimension and compact structure.
- · Small footprint and low construction investment; with a protective cover it can be placed outdoors.
- · The shaft seal uses an externally mounted high-quality mechanical seal; the stationary and rotating rings are made of new hard alloy and ceramic, with wear resistance, no leakage and long service life.
- · The pump and motor bearings are reasonably configured to effectively balance the radial and axial loads generated during pump operation, thus ensuring smooth operation with very low vibration and noise.
- · The pump has a vertical structure, with the inlet and outlet of the same diameter located on the same centerline; it can be installed in a pipeline like a valve, and the boiler feed pump has a compact and attractive appearance.
Material selection basis
- Special steels are widely used for sulfuric acid at 80–100%, with temperatures up to 60–80°C. In sulfuric acid of this concentration and temperature range, a protective iron sulfate film can form on the surface of the steel. Cast iron is not suitable for fuming sulfuric acid above 100%, possibly because sulfur trioxide reacts with the silicon contained in the iron, making the cast iron brittle. Carbon steel is not suitable for 100–102% fuming sulfuric acid, but is suitable again for acid above 102%, with the temperature limited to about 60°C. Dilute sulfuric acid is highly corrosive to steel; when the acid concentration is around 47%, the corrosion rate reaches a relatively high value. When the acid concentration exceeds 65%, the corrosion rate of steel decreases significantly. However, in the concentration range of 65–80%, it is still best not to use steel; using lead or other acid-resistant materials is safer.
- · Sulfuric acid concentration: 80%–98%; special cast iron use temperature: 25°C–50°C.
- · Sulfuric acid concentration: 80%–98%; special carbon steel use temperature: 25°C–60°C.
Performance parameters
| Model |
Flow (m³/h) |
Head (m) |
Speed (r/min) |
Power (kW) |
| GBL25-125 |
4 |
20 |
2900 |
1.5 |
| GBL25-160 |
32 |
2900 |
2.2 |
| GBL32-125 |
5 |
20 |
2900 |
1.5 |
| GBL32-160 |
32 |
2900 |
2.2 |
| GBL40-125 |
6.3 |
20 |
2900 |
1.5 |
| GBL40-160 |
32 |
2900 |
3 |
| GBL40-200 |
50 |
2900 |
5.5 |
| GBL50-100 |
12.5 |
12.5 |
2900 |
1.5 |
| GBL50-125 |
20 |
2900 |
2.2 |
| GBL50-160 |
32 |
2900 |
4 |
| GBL50-200 |
50 |
2900 |
7.5 |
| GBL65-100 |
25 |
12.5 |
2900 |
2.2 |
| GBL65-125 |
20 |
2900 |
4 |
| GBL65-160 |
32 |
2900 |
5.5 |
| GBL65-200 |
50 |
2900 |
11 |
| GBL80-100 |
50 |
12.5 |
2900 |
4 |
| GBL80-125 |
20 |
2900 |
7.5 |
| GBL80-160 |
32 |
2900 |
11 |
| GBL80-200 |
50 |
2900 |
18.5 |
| GBL100-100 |
100 |
12.5 |
2900 |
7.5 |
| GBL100-125 |
20 |
2900 |
15 |
| GBL100-160 |
32 |
2900 |
18.5 |
| GBL100-200 |
50 |
2900 |
30 |
| GBL125-100 |
160 |
12.5 |
2900 |
15 |
| GBL125-125 |
20 |
2900 |
18.5 |
| GBL125-160 |
32 |
2900 |
30 |
| GBL125-200 |
50 |
2900 |
45 |
| GBL150-125 |
20 |
2900 |
18.5 |
| GBL150-160 |
32 |
2900 |
30 |
| GBL200-200 |
200 |
12.5 |
1450 |
18.5 |
| GBL200-250 |
20 |
1450 |
22 |
| GBL250-250 |
550 |
20 |
1450 |
55 |