Product introduction
The GBL vertical concentrated sulfuric acid chemical pump from Asia Pump Industry is an optimized design based on the performance parameters of the IG-type centrifugal pump, utilizing two materials—cast iron and carbon steel—specifically for concentrated sulfuric acid, along with an excellent hydraulic model. It is an ideal new generation of chemical pumps.
Особенности
- · The impeller is mounted directly on the extended motor shaft, with a short axial dimension and compact structure.
- · Small footprint and low construction investment; with a protective cover it can be placed outdoors.
- · The shaft seal uses an externally mounted high-quality mechanical seal; the stationary and rotating rings are made of new hard alloy and ceramic, with wear resistance, no leakage and long service life.
- · The pump and motor bearings are reasonably configured to effectively balance the radial and axial loads generated during pump operation, thus ensuring smooth operation with very low vibration and noise.
- · The pump has a vertical structure, with the inlet and outlet of the same diameter located on the same centerline; it can be installed in a pipeline like a valve, and the boiler feed pump has a compact and attractive appearance.
Material selection basis
- Special steels are widely used for sulfuric acid at 80–100%, with temperatures up to 60–80°C. In sulfuric acid of this concentration and temperature range, a protective iron sulfate film can form on the surface of the steel. Cast iron is not suitable for fuming sulfuric acid above 100%, possibly because sulfur trioxide reacts with the silicon contained in the iron, making the cast iron brittle. Carbon steel is not suitable for 100–102% fuming sulfuric acid, but is suitable again for acid above 102%, with the temperature limited to about 60°C. Dilute sulfuric acid is highly corrosive to steel; when the acid concentration is around 47%, the corrosion rate reaches a relatively high value. When the acid concentration exceeds 65%, the corrosion rate of steel decreases significantly. However, in the concentration range of 65–80%, it is still best not to use steel; using lead or other acid-resistant materials is safer.
- · Sulfuric acid concentration: 80%–98%; special cast iron use temperature: 25°C–50°C.
- · Sulfuric acid concentration: 80%–98%; special carbon steel use temperature: 25°C–60°C.
Performance parameters
| Model |
Flow (m³/h) |
Head (m) |
Speed (r/min) |
Power (kW) |
| GBL25-125 |
4 |
20 |
2900 |
1.5 |
| GBL25-160 |
32 |
2900 |
2.2 |
| GBL32-125 |
5 |
20 |
2900 |
1.5 |
| GBL32-160 |
32 |
2900 |
2.2 |
| GBL40-125 |
6.3 |
20 |
2900 |
1.5 |
| GBL40-160 |
32 |
2900 |
3 |
| GBL40-200 |
50 |
2900 |
5.5 |
| GBL50-100 |
12.5 |
12.5 |
2900 |
1.5 |
| GBL50-125 |
20 |
2900 |
2.2 |
| GBL50-160 |
32 |
2900 |
4 |
| GBL50-200 |
50 |
2900 |
7.5 |
| GBL65-100 |
25 |
12.5 |
2900 |
2.2 |
| GBL65-125 |
20 |
2900 |
4 |
| GBL65-160 |
32 |
2900 |
5.5 |
| GBL65-200 |
50 |
2900 |
11 |
| GBL80-100 |
50 |
12.5 |
2900 |
4 |
| GBL80-125 |
20 |
2900 |
7.5 |
| GBL80-160 |
32 |
2900 |
11 |
| GBL80-200 |
50 |
2900 |
18.5 |
| GBL100-100 |
100 |
12.5 |
2900 |
7.5 |
| GBL100-125 |
20 |
2900 |
15 |
| GBL100-160 |
32 |
2900 |
18.5 |
| GBL100-200 |
50 |
2900 |
30 |
| GBL125-100 |
160 |
12.5 |
2900 |
15 |
| GBL125-125 |
20 |
2900 |
18.5 |
| GBL125-160 |
32 |
2900 |
30 |
| GBL125-200 |
50 |
2900 |
45 |
| GBL150-125 |
20 |
2900 |
18.5 |
| GBL150-160 |
32 |
2900 |
30 |
| GBL200-200 |
200 |
12.5 |
1450 |
18.5 |
| GBL200-250 |
20 |
1450 |
22 |
| GBL250-250 |
550 |
20 |
1450 |
55 |