บริษัทเซี่ยงไฮ้ ย่าโจว ปั๊ม จำกัด · ผู้ผลิตปั๊มมืออาชีพ สายด่วน: 021-57775777 มือถือ: 15921707645 อีเมล: 34305982@qq.com
หน้าแรก / ศูนย์ผลิตภัณฑ์ / ปั๊มเคมี / ปั๊มเคมีกรดซัลฟิวริกเข้มข้นแบบตั้ง GBL

ปั๊มเคมีกรดซัลฟิวริกเข้มข้นแบบตั้ง GBL

ปั๊มเคมี

ปั๊มเคมีกรดซัลฟิวริกเข้มข้นแบบตั้ง GBL ของ Asia Pump Industry ได้รับการออกแบบมาอย่างเหมาะสมตามพารามิเตอร์ประสิทธิภาพของปั๊มแรงเหวี่ยงแบบ IG โดยใช้เหล็กหล่อสำหรับกรดซัลฟิวริกเข้มข้นโดยเฉพาะ เหล็กกล้าคาร์บอนสองชนิด และแบบจำลองไฮดรอลิกที่ยอดเยี่ยม เป็นปั๊มเคมีรุ่นใหม่ที่เหมาะอย่างยิ่ง

  • หมวดหมู่ปั๊มเคมี
  • รุ่นปั๊มเคมีกรดซัลฟิวริกเข้มข้นแบบตั้ง GBL
  • สายด่วน021-57775777 / 15921707645
  • อีเมล34305982@qq.com

แนะนำสินค้า

Product introduction

ปั๊มเคมีกรดซัลฟิวริกเข้มข้นแบบตั้ง GBL ของ Asia Pump Industry ได้รับการออกแบบมาอย่างเหมาะสมตามพารามิเตอร์ประสิทธิภาพของปั๊มแรงเหวี่ยงแบบ IG โดยใช้เหล็กหล่อสำหรับกรดซัลฟิวริกเข้มข้นโดยเฉพาะ เหล็กกล้าคาร์บอนสองชนิด และแบบจำลองไฮดรอลิกที่ยอดเยี่ยม เป็นปั๊มเคมีรุ่นใหม่ที่เหมาะอย่างยิ่ง

คุณสมบัติ

  • · The impeller is mounted directly on the extended motor shaft, with a short axial dimension and compact structure.
  • · Small footprint and low construction investment; with a protective cover it can be placed outdoors.
  • · The shaft seal uses an externally mounted high-quality mechanical seal; the stationary and rotating rings are made of new hard alloy and ceramic, with wear resistance, no leakage and long service life.
  • · The pump and motor bearings are reasonably configured to effectively balance the radial and axial loads generated during pump operation, thus ensuring smooth operation with very low vibration and noise.
  • · The pump has a vertical structure, with the inlet and outlet of the same diameter located on the same centerline; it can be installed in a pipeline like a valve, and the boiler feed pump has a compact and attractive appearance.

Material selection basis

  • Special steels are widely used for sulfuric acid at 80–100%, with temperatures up to 60–80°C. In sulfuric acid of this concentration and temperature range, a protective iron sulfate film can form on the surface of the steel. Cast iron is not suitable for fuming sulfuric acid above 100%, possibly because sulfur trioxide reacts with the silicon contained in the iron, making the cast iron brittle. Carbon steel is not suitable for 100–102% fuming sulfuric acid, but is suitable again for acid above 102%, with the temperature limited to about 60°C. Dilute sulfuric acid is highly corrosive to steel; when the acid concentration is around 47%, the corrosion rate reaches a relatively high value. When the acid concentration exceeds 65%, the corrosion rate of steel decreases significantly. However, in the concentration range of 65–80%, it is still best not to use steel; using lead or other acid-resistant materials is safer.
  • · Sulfuric acid concentration: 80%–98%; special cast iron use temperature: 25°C–50°C.
  • · Sulfuric acid concentration: 80%–98%; special carbon steel use temperature: 25°C–60°C.

Performance parameters

Model  Flow 
(m³/h)
 Head 
(m)
 Speed 
(r/min)
 Power 
(kW)
GBL25-125 4 20 2900 1.5
GBL25-160 32 2900 2.2
GBL32-125 5 20 2900 1.5
GBL32-160 32 2900 2.2
GBL40-125 6.3 20 2900 1.5
GBL40-160 32 2900 3
GBL40-200 50 2900 5.5
GBL50-100 12.5 12.5 2900 1.5
GBL50-125 20 2900 2.2
GBL50-160 32 2900 4
GBL50-200 50 2900 7.5
GBL65-100 25 12.5 2900 2.2
GBL65-125 20 2900 4
GBL65-160 32 2900 5.5
GBL65-200 50 2900 11
GBL80-100 50 12.5 2900 4
GBL80-125 20 2900 7.5
GBL80-160 32 2900 11
GBL80-200 50 2900 18.5
GBL100-100 100 12.5 2900 7.5
GBL100-125 20 2900 15
GBL100-160 32 2900 18.5
GBL100-200 50 2900 30
GBL125-100 160 12.5 2900 15
GBL125-125 20 2900 18.5
GBL125-160 32 2900 30
GBL125-200 50 2900 45
GBL150-125 20 2900 18.5
GBL150-160 32 2900 30
GBL200-200 200 12.5 1450 18.5
GBL200-250 20 1450 22
GBL250-250 550 20 1450 55

ผลิตภัณฑ์ที่เกี่ยวข้อง